參數資料
型號: GS1531-CB
廠商: Gennum Corporation
英文描述: GS1531 HD-LINX-TM II Multi-Rate Serializer
中文描述: GS1531的HD - LINX進程,商標第二多速率串行器
文件頁數: 1/49頁
文件大?。?/td> 500K
代理商: GS1531-CB
www.gennum.com
GS1531 HD-LINX II
Multi-Rate Serializer
GS1531 Data Sheet
30573 - 4
July 2005
1 of 49
Key Features
SMPTE 292M and SMPTE 259M-C compliant
scrambling and NRZ
NRZI encoding (with
bypass)
DVB-ASI sync word insertion and 8b/10b encoding
Superior rejection of jitter on input PCLK
user selectable additional processing features
including:
CRC, ANC data checksum, and line number
calculation and insertion
TRS and EDH packet generation and insertion
illegal code remapping
internal flywheel for noise immune TRS generation
20-bit / 10-bit CMOS parallel input data bus
148.5MHz / 74.25MHz / 27MHz / 13.5MHz parallel
digital input
automatic standards detection and indication
1.8V core power supply and 3.3V charge pump
power supply
3.3V digital I/O supply
JTAG test interface
Available in a Pb-free package
small footprint (11mm x 11mm)
Applications
SMPTE 292M Serial Digital Interfaces
SMPTE 259M-C Serial Digital Interfaces
DVB-ASI Serial Digital Interfaces
Description
The GS1531 is a multi-standard serializer with an
integrated cable driver. When used in conjunction with
the GO1525 Voltage Controlled Oscillator, a transmit
solution can be realized for HD-SDI, SD-SDI and
DVB-ASI applications.
The device features an internal PLL, which can be
configured for loop bandwidth as narrow as 100kHz.
Thus the GS1531 can tolerate substantive jitter on the
input PCLK and still provide output jitter well within
SMPTE specification. Connect the output clocks from
Gennum’s GS4911 clock generator directly to the
GS1531’s PCLK input and configure the GS1531’s loop
bandwidth accordingly.
In addition to serializing the input, the GS1531 performs
NRZ-to-NRZI encoding and scrambling as per SMPTE
292M/259M-C when operating in SMPTE mode. When
operating in DVB-ASI mode, the device will insert K28.5
sync characters and 8b/10b encode the data prior to
serialization.
Parallel data inputs are provided for 10-bit multiplexed
or 20-bit demultiplexed formats at both HD and SD
signal rates. An appropriate parallel clock input signal is
also required.
The integrated cable driver features an output mute on
loss of parallel clock, high impedance mode, adjustable
signal swing, and automatic dual slew rate selection
depending on HD/SD operational requirements.
The GS1531 also includes a range of data processing
functions including automatic standards detection and
EDH support. The device can also insert TRS signals,
calculate and insert line numbers and CRC’s, re-map
illegal code words and insert SMPTE 352M payload
identifier packets. All processing features are optional
and may be enabled/disabled via external control pin(s)
and/or host interface programming.
相關PDF資料
PDF描述
GS1531-CBE2 GS1531 HD-LINX-TM II Multi-Rate Serializer
GS1532 HD-LINX II Voltage Controlled Oscillator
GS1560 HD-LINX II Voltage Controlled Oscillator
GS9060 HD-LINX II Voltage Controlled Oscillator
GS9062 HD-LINX II Voltage Controlled Oscillator
相關代理商/技術參數
參數描述
GS1531CBE2 制造商:Gennum Corporation 功能描述:SERIALISER HD/SD/ASI W/DRIVER 100BGA
GS1531-CBE2 制造商:Gennum Corporation 功能描述:Serializer 100-Pin BGA
GS1531CBE3 制造商:Gennum Corporation 功能描述:SERIALISER HD/SD/ASI W/DRIVER 100BGA
GS1532 制造商:GENNUM 制造商全稱:GENNUM 功能描述:Multi-Rate Serializer with ClockCleaner