
GP2L09/GP2L24/GP2L26
I
Precautions for Use
(1) In order to stabilize power supply line, connect a by-pass capacitor of more than 0.01
μ
F bet-
ween Vcc and GND near the device.
(2) In this product, the PWB is fixed with a resin cover, and cleaning solvent may remain inside
the case; therefore, dip cleaning or ultrasonic cleaning are prohibited.
Ethyl alcohol, Methyl alcohol, Isopropyl alcohol, Freon TE, Freon TF, Diflon solvent S3-E
When the cleaning solvents except for specified materials are used, please consult us.
(4) As for other general cautions, refer to the chapter “ Precautions for Use”.
(3) Remove dust or stains, using an air blower or a soft cloth moistened in cleaning solvent.
However, do not perform the above cleaning using a soft cloth with cleaning solvent in the
marking portion.
In this case, use only the following type of cleaning solvent used for wiping off: