
93
G6K
G6K
■
Contact Ratings
■
Characteristics
Note:
Note:
The above values are initial values.
1.
The contact resistance was measured with 10 mA at 1 VDC with a voltage-drop method.
2.
Values in parentheses are actual values.
3.
The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking
the dielectric strength.
4.
This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50
. This
value may vary depending on the switching frequency and operating environment. Always double-check relay suitability under
actual operating conditions.
Load
Rated load
Rated carry current
Max. switching voltage
Max. switching current
Resistive load
0.3 A at 125 VAC; 1 A at 30 VDC
1 A
125 VAC, 60 VDC
1 A
Item
Single-side stable models (double-pole)
Single-winding latching
model
G6KU-2F-Y, G6KU-2G-Y,
G6KU-2P-Y
G6K-2F, G6K-2G, G6K-2P
G6K-2F-Y, G6K-2G-Y,
G6K-2P-Y
Contact resistance (See note 1.)
Operating (set) time (See note 2.)
Release (reset) time (See note 2.)
Insulation resistance (See note 3.)
Dielectric
strength
Contacts of different
polarity
Contacts of same po-
larity
Impulse
withstand
voltage
polarity
Contacts of same po-
larity
Vibration resistance
100 m
max.
3 ms max. (approx. 1.4 ms)
3 ms max. (approx. 1.3 ms)
1,000 M
min. (at 500 VDC)
1,500 VAC, 50/60 Hz for 1 min
1,000 VAC, 50/60 Hz for 1 min
3 ms max. (approx. 1.2 ms)
3 ms max. (approx. 1.2 ms)
Coil and contacts
750 VAC, 50/60 Hz for 1 min
Coil and contacts
Contacts of different
1,500 V (10 x 160
μ
s)
1,500 V (10 x 160
μ
s)
2,500 V (2 x 10
μ
s), 1,500 V (10 x 160
μ
s)
Destruction: 10 to 55 Hz, 2.5-mm single amplitude (5-mm double amplitude) and 55 to 500 Hz,
300 m/s
2
(approx. 30G)
Malfunction: 10 to 55 Hz, 1.65-mm single amplitude (3.3-mm double amplitude) and 55 to 500 Hz,
200 m/s
2
(approx. 20G)
Destruction: 1,000 ms
2
(approx. 100G)
Malfunction: 750 ms
2
(approx. 75G)
Mechanical: 50,000,000 operations min. (at 36,000 operations/hour)
Electrical: 100,000 operations min. (with a rated load at 1,800 operations/hour)
10
μ
A at 10 mVDC
Operating:
40
°
C to 70
°
C (with no icing or condensation)
Operating: 5% to 85%
Approx. 0.7 g
Shock resistance
Endurance
Failure rate (P level) (See note 4.)
Ambient temperature
Ambient humidity
Weight