- 您現在的位置：買賣IC網 > PDF目錄97943 > FTLX8511D3BTL FIBER OPTIC TRANSCEIVER, 840-860nm, 10500Mbps(Tx), 10500Mbps(Rx), SURFACE MOUNT, LC CONNECTOR PDF資料下載
參數資料
| 型號： | FTLX8511D3BTL |
| 元件分類： | 光收發 |
| 英文描述： | FIBER OPTIC TRANSCEIVER, 840-860nm, 10500Mbps(Tx), 10500Mbps(Rx), SURFACE MOUNT, LC CONNECTOR |
| 封裝： | ROHS COMPLIANT PACKAGE |
| 文件頁數： | 9/11頁 |
| 文件大?。?/td> | 237K |
| 代理商： | FTLX8511D3BTL |
FTLX8511D3BTL Industrial Temperature XFP SR Specification – August 2010
F i n i s a r
Finisar Corporation August 2010
Rev B
Page 7
VIII. Digital Diagnostic Functions
As defined by the XFP MSA1, Finisar XFP transceivers provide digital diagnostic
functions via a 2-wire serial interface, which allows real-time access to the following
operating parameters:
Transceiver temperature
Laser bias current
Transmitted optical power
Received optical power
Transceiver supply voltage
It also provides a sophisticated system of alarm and warning flags, which may be used to
alert end-users when particular operating parameters are outside of a factory-set normal
range.
The operating and diagnostics information is monitored and reported by a Digital
Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed
through the 2-wire serial interface. When the serial protocol is activated, the serial clock
signal (SCL pin) is generated by the host. The positive edge clocks data into the XFP
transceiver into those segments of its memory map that are not write-protected. The
negative edge clocks data from the XFP transceiver. The serial data signal (SDA pin) is
bi-directional for serial data transfer. The host uses SDA in conjunction with SCL to
mark the start and end of serial protocol activation. The memories are organized as a
series of 8-bit data words that can be addressed individually or sequentially. The 2-wire
serial interface provides sequential or random access to the 8 bit parameters, addressed
from 000h to the maximum address of the memory.
For more detailed information including memory map definitions, please see Finisar
Application Note AN-2035 “Digital Diagnostic Monitoring Interface for XFP Optical
Transceivers”, or the XFP MSA Specification1.
相關PDF資料 |
PDF描述 |
|---|---|
| FTLX8551E3S | FIBER OPTIC TRANSCEIVER, TRANSPONDER, 840-860nm, 10000Mbps(Tx), 10000Mbps(Rx), PANEL MOUNT, LC CONNECTOR |
| FTLX8551E3 | FIBER OPTIC TRANSCEIVER, TRANSPONDER, 840-860nm, 10000Mbps(Tx), 10000Mbps(Rx), PANEL MOUNT, LC CONNECTOR |
| FTLX8551F3 | FIBER OPTIC TRANSCEIVER, TRANSPONDER, 840-860nm, 10000Mbps(Tx), 10000Mbps(Rx), PANEL MOUNT, LC CONNECTOR |
| FTM-3112C-SLG | FIBER OPTIC TRANSCEIVER, 1270-1355nm, 1250Mbps(Tx), 1250Mbps(Rx) |
| FTM-311XC-L03G | FIBER OPTIC TRANSCEIVER, 1260-1355nm, 10312.5Mbps(Tx), 10312.5Mbps(Rx), LC CONNECTOR |
相關代理商/技術參數 |
參數描述 |
|---|---|
| FTLX8512D3BCL | 功能描述:光纖發射器、接收器、收發器 PIN 10GBASE-SR/SW 1200-Mx-SN-I trnscvr RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: 工作電源電壓: |
| FTLX8512D3BTL | 功能描述:光纖發射器、接收器、收發器 PIN 10GBASE-SR/SW 1200-Mx-SN-I trnscvr RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: 工作電源電壓: |
| FTLX8541E2 | 功能描述:TXRX OPT X2 10 GB/S 850NM RoHS:是 類別:光電元件 >> 光纖 - 收發器 系列:- 標準包裝:20 系列:* |
| FTLX8541F2 | 制造商:FINISAR 制造商全稱:FINISAR 功能描述:RoHS-6 Compliant 10 Gb/s 850nm Multimode X2 Transponder |
| FTLX8551E3 | 功能描述:TXRX OPT XPAK 10 GB/S 850NM RoHS:是 類別:光電元件 >> 光纖 - 收發器 系列:- 標準包裝:20 系列:* |
發布緊急采購，3分鐘左右您將得到回復。