參數資料
型號: FT245BM
廠商: Future Technology Devices International Ltd
元件分類: 微控制器/微處理器
中文描述: SPECIALTY MICROPROCESSOR CIRCUIT, PQFP32
封裝: 7 X 7 MM, 0.80 MM PITCH, LQFP-32
文件頁數: 19/24頁
文件大小: 995K
代理商: FT245BM
DS245B Version 1.7
Future Technology Devices Intl. Ltd. 2005
Page 4 of 24
FT245BM USB FIFO ( USB - Parallel ) I.C.
approach allows a customer to create a “generic”
USB peripheral who’s hardware function can be
dened under control of the application software.
The FPGA based hardware can be easily upgraded
or totally changed simply by changing the FPGA
conguration data le. Application notes, software
and development modules for this application area
will be available from FTDI and other 3rd party
developers.
Less External Support Components
As well as eliminating the RCCLK RC network, and
for most applications the need for an external reset
circuit, we have also eliminated the requirement
for a 100K pull-up on EECS to select 6MHz
operation. When the FT245BM is being used
without the conguration EEPROM, EECS, EESK
and EEDATA can now be left n/c. For circuits
requiring a long reset time (where the device is
reset externally using a reset generator I.C., or
reset is controlled by the IO port of a MCU, FPGA
or ASIC device) an external transistor circuit is
no longer required as the 1.5K pull-up resistor on
USBDP can be wired to the RSTOUT# pin instead
of to 3.3V. Note : RSTOUT# drives out at 3.3V
level, not at 5V VCC level. This is the preferred
conguration for new designs.
Extended EEPROM Support
The previous generation of devices only supported
EEPROM of type 93C46 (64 x 16 bit). The new
devices will also work with EEPROM type 93C56
(128 x 16 bit) and 93C66 (256 x 16 bit). The extra
space is not used by the device, however it is
available for use by other external MCU / logic
whilst the FT245BM is being held in reset.
USB 2.0 ( full speed option )
A new EEPROM based option allows the FT245BM
to return a USB 2.0 device descriptor as opposed
to USB 1.1. Note : The device would be a USB 2.0
Full Speed device (12Mb/s) as opposed to a USB
2.0 High Speed device (480Mb/s).
Multiple Device Support without EEPROM
When no EEPROM (or a blank or invalid
EEPROM) is attached to the device, the FT245BM
no longer gives a serial number as part of its
USB descriptor. This allows multiple devices to
be simultaneously connected to the same PC.
However, we still highly recommend that EEPROM
is used, as without serial numbers a device can
only be identied by which hub port in the USB tree
it is connected to which can change if the end user
re-plugs the device into a different USB port.
EEREQ# / EEGNT#
These (FT8U245AM) pins are no longer supported
on the FT245BM device. They have been replaced
with the new SI / WU and PWREN# signals
respectively.
OBSOLETE
相關PDF資料
PDF描述
FTL-1419-3D FIBER OPTIC TRANSCEIVER, 1290-1340nm, 1250Mbps(Tx), 1250Mbps(Rx), PANEL MOUNT
FTLF1321P1BTL FIBER OPTIC TRANSCEIVER, 1270-1360nm, 2667Mbps(Tx), 2667Mbps(Rx), SURFACE MOUNT, LC CONNECTOR
FTLF1321P1WTL FIBER OPTIC TRANSCEIVER, 1270-1360nm, 2667Mbps(Tx), 2667Mbps(Rx), SURFACE MOUNT, LC CONNECTOR
FTLF2318P1BNL FIBER OPTIC TRANSCEIVER, 1270-1360nm, 1250Mbps(Tx), 1250Mbps(Rx), SURFACE MOUNT, SFP CONNECTOR
FTLX1811M3 FIBER OPTIC TRANSCEIVER, 1530-1565nm, 11100Mbps(Tx), 11100Mbps(Rx), PANEL MOUNT, LC CONNECTOR
相關代理商/技術參數
參數描述
FT245BM-TRAY 功能描述:USB 接口集成電路 Obsolete See FT245RL RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
FT245BQ 制造商:未知廠家 制造商全稱:未知廠家 功能描述:FT245BQ USB FIFO ( USB - Parallel ) I.C.
FT245BQ-REEL 功能描述:USB 接口集成電路 USB to Parallel FIFO IC QFN-32 RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
FT245R 制造商:FTDI 制造商全稱:FTDI 功能描述:USB FIFO I.C. Incorporating FTDIChip-ID⑩ Security Dongle
FT245R_10 制造商:FTDI 制造商全稱:FTDI 功能描述:USB FIFO IC - Single chip USB to parallel FIFO bidirectional data transfer interface