參數資料
型號： FT245BL
廠商： Electronic Theatre Controls, Inc.
英文描述： FT245BL USB FIFO ( USB - Parallel ) I.C.
中文描述： FT245BL USB先進先出（USB端口-并行）集成電路
文件頁數： 6/24頁
文件大小： 505K
代理商： FT245BL
DS245BL Version 1.6 Future Technology Devices Intl. Ltd. 2005
Page 6 of 24
FT245BL USB FIFO ( USB - Parallel ) I.C.
Serial Interface Engine (SIE)
The Serial Interface Engine (SIE) block performs
the Parallel to Serial and Serial to Parallel
conversion of the USB data. In accordance to the
USB 2.0 specification, it performs bit stuffing / un-
stuffing and CRC5 / CRC16 generation / checking
on the USB data stream.
USB Protocol Engine
The USB Protocol Engine manages the data
stream from the device USB control endpoint. It
handles the low level USB protocol (Chapter 9)
requests generated by the USB host controller
and the commands for controlling the functional
parameters of the FIFO.
FIFO Receive Buffer (128 bytes)
Data sent from the USB Host to the FIFO via
the USB data out endpoint is stored in the FIFO
Receive Buffer and is removed from the buffer by
reading the FIFO contents using RD#.
FIFO Transmit Buffer (384 bytes)
Data written into the FIFO using WR# is stored in
the FIFO Transmit Buffer. The Host removes Data
from the FIFO Transmit Data by sending a USB
request for data from the device data in endpoint.
FIFO Controller
The FIFO Controller handles the transfer of data
between the external FIFO interface pins and the
FIFO Transmit and Receive buffers.
RESET Generator
The Reset Generator Cell provides a reliable
power-on reset to the device internal circuitry
on power up. An additional RESET# input and
RSTOUT# output are provided to allow other
devices to reset the FT245BL, or the FT245BL
to reset other devices respectively. During reset,
RSTOUT# is driven low, otherwise it drives out
at the 3.3V provided by the onboard regulator.
RSTOUT# can be used to control the 1.5K
pull-up on USBDP directly where delayed USB
enumeration is required. RSTOUT# will be low for
approximately 5ms after VCC has risen above 3.5V
AND the device oscillator is running AND RESET#
is high. RESET# should be tied to VCC unless it
is a requirement to reset the device from external
logic or an external reset generator I.C.
EEPROM Interface
Though the FT245BL will work without the optional
EEPROM, an external 93C46 (93C56 or 93C66)
EEPROM can be used to customise the USB VID,
PID, Serial Number, Product Description Strings
and Power Descriptor value of the FT245BL for
OEM applications. Other parameters controlled
by the EEPROM include Remote Wake Up,
Isochronous Transfer Mode, Soft Pull Down on
Power-Off and USB 2.0 descriptor modes.
The EEPROM should be a 16 bit wide
configuration such as a MicroChip 93LC46B or
equivalent capable of a 1Mb/s clock rate at VCC =
4.35V to 5.25V. The EEPROM is programmable-
on board over USB using a utility available from
http://www.ftdichip.com
相關PDF資料
PDF描述
FT245BM FT245BM USB FIFO ( USB - Parallel ) I.C.
FT245BQ FT245BQ USB FIFO ( USB - Parallel ) I.C.
FT6116 2K X 8 CMOS SRAM
FT8U100AX FT8U100AX USB Compound Hub Controller
FTD1011 Ultrahigh-Speed Switching Applications
相關代理商/技術參數
參數描述
FT245BL/TR 制造商:Future Technology Devices International (FTDI Chip) 功能描述:IC USB FIFO SMD LQFP32 245 制造商:Future Technology Devices International (FTDI Chip) 功能描述:IC, USB FIFO, SMD, LQFP32, 245 制造商:Future Technology Devices International (FTDI Chip) 功能描述:IC, USB FIFO INTERFACE, 480MBPS, LQFP-32; USB Type:FIFO; USB Version:1.1, 2.0; Supply Voltage Min:4.35V; Supply Voltage Max:5.25V; Digital IC Case Style:LQFP; No. of Pins:32; Data Rate:480Mbps; No. of Ports:2; MSL:MSL 3 - 168 hours ;RoHS Compliant: Yes
FT245BL-REEL 功能描述:USB 接口集成電路 USB to Parallel FIFO IC LQFP-32 RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
FT245BL-TRAY 制造商:Future Technology Devices International (FTDI Chip) 功能描述:USB FIFO ( USB - PARALLEL ) I.C.
FT245BM 功能描述:先進先出 Obsolete See FT245RL RoHS:否 制造商:IDT 電路數量: 數據總線寬度:18 bit 總線定向:Unidirectional 存儲容量:4 Mbit 定時類型:Synchronous 組織:256 K x 18 最大時鐘頻率:100 MHz 訪問時間:10 ns 電源電壓-最大:3.6 V 電源電壓-最小:6 V 最大工作電流:35 mA 最大工作溫度:+ 85 C 封裝 / 箱體:TQFP-80 封裝:
FT245BM-TRAY 功能描述:USB 接口集成電路 Obsolete See FT245RL RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20
發布緊急采購，3分鐘左右您將得到回復。