
Supports all control signals for
serial
type
connection
Connects up to 16 flash chips
Operation of up to 4 chips
simultaneously
Supports multi-die chips
Compatible with: NAND chips
(Samsung, Toshiba, AMD etc.),
AND chips (Hitachi, Mitsubishi
etc.), NROM chips (Ingentix)
On-chip voltage regulator for 3.3V
and 1.8V flash memory and 2.5V
processor core power supply
Flash memory power down logic
Re-programmable
Operating system and controller
specific firmware stored in boot
ROM, memory specific firmware is
stored in flash memory and loaded
into internal RAM during boot up
Integration of security or copy
protection features possible even
after production
Error Correction Code (ECC)
capable of correcting 6 bytes in a
512 byte sector, no overhead for
write and read operations
Flash memory write protect control
flash
memory
firmware:
Highly-Compatible
Flash Memory Interface
Key Features
Based on the Hyperstone 32-bit
RISC microprocessor core
20 to 50 MHz clock frequency
using R-C oscillator, no external
crystal required
8 Kbytes internal boot ROM, 16
Kbytes internal RAM
Automatic
power-down
(power consumption < 100μA)
during wait periods for host data or
completion of flash memory
operation
0.25 μm CMOS technology
5.0V or 3.3V supply voltage
Patented wear-leveling software
algorithm executed in RISC core
equalizes usage of all memory
locations to maximize card‘s life
mode
Selectable
Host Interface
16-bit interface to host device,
compliant with ATA and PCMCIA
2.1 standard, can be used for
DOM, disk-on-chip (DOC) and
flash disk applications with virtually
unlimited capacity
Memory mapped or I/O operation
Automatic recognition of PCMCIA
or True-IDE mode
Fast ATA host-to-buffer transfer
rates supporting PIO 4 in True-IDE
mode
Dual-integrated 512 byte PCMCIA
sector buffers and 256 byte
PCMCIA attribute memory
PCMCIA
configuration
register, card configuration and
status
register,
replacement register support
option
and
pin
High-Performance
Controller Core
Service and Support
Hyperstone offers technical support
and design services for embedded
systems, boards, ASICs, ASSPs and
software customization. You benefit
from short design cycles, short time
to
market
and
cost/performance ratio.
a
superior
Hyperstone AG
Line-Eid-Strasse 3
78467 Konstanz, Germany
Phone: +49 7531 98030
Fax: +49 7531 51725
E-mail: info@hyperstone.de
Web:
www.hyperstone.com
Hyperstone Taiwan
11F, No.183, Sec.2, Tiding Blvd.
Neihu District, Taipei City 114, Taiwan, R.O.C.
Phone +886 2 2698 2702
Fax: +886 2 2698 2872
E-mail: taiwan@hyperstone.com
Web:
www.hyperstone.com.tw
Content is subject to change without prior notice. F2-16XN, F2-16XT and Hyperflash are trademarks of Hyperstone AG. Other brand, product or company names are property
of the respective holder. Warranties, implied or expressed as well as liabilities for any damage resulting from using the provided information in this document are excluded until
part of a separate written contract.
HS-Mkt-AM-002-03-11
F2-16X Block Diagram