
IGLOO nano DC and Switching Characteristics
2- 66
Advance v0.2
Clock Conditioning Circuits
CCC Electrical Specifications
Timing Characteristics
Table 2-92 IGLOO nano CCC/PLL Specification
For IGLOO nano V2 or V5 devices, 1.5 V DC Core Supply Voltage
Parameter
Min.
Typ.
Max.
Units
Clock Conditioning Circuitry Input Frequency fIN_CCC
1.5
250
MHz
Clock Conditioning Circuitry Output Frequency fOUT_CCC
0.75
250
MHz
Delay Increments in Programmable Delay Blocks 1, 2
360
ps
Number of Programmable Values in Each Programmable Delay Block
32
Serial Clock (SCLK) for Dynamic PLL 5
100
Input Cycle-to-Cycle Jitter (peak magnitude)
1
ns
CCC Output Peak-to-Peak Period Jitter FCCC_OUT
Max Peak-to-Peak Period Jitter
1 Global
Network
Used
External
FB Used
3 Global
Networks
Used
0.75 MHz to 24 MHz
0.50%
0.75%
0.70%
24 MHz to 100 MHz
1.00%
1.50%
1.20%
100 MHz to 250 MHz
2.50%
3.75%
2.75%
Acquisition Time
LockControl = 0
300
s
LockControl = 1
6.0
ms
Tracking Jitter
LockControl = 0
2.5
ns
LockControl = 1
1.5
ns
Output Duty Cycle
48.5
51.5
%
Delay Range in Block: Programmable Delay 1 1, 2
1.25
15.65
ns
Delay Range in Block: Programmable Delay 2 1, 2
0.025
15.65
ns
Delay Range in Block: Fixed Delay 1, 2
3.5
ns
Notes:
for deratings.
2. TJ = 25°C, VCC = 1.5 V
3. The AGLN010, AGLN015, and AGLN020 devices do not support PLL.
4. Tracking jitter is defined as the variation in clock edge position of PLL outputs with reference to the PLL
input clock edge. Tracking jitter does not measure the variation in PLL output period, which is covered by
the period jitter parameter.
5. Maximum value obtained for a STD speed grade device in Worst-Case Commercial conditions. For specific
for derating values.