Elm Electronics – Circuits for the Hobbyist
參數資料
型號: ELM446SM
廠商: Electronic Theatre Controls, Inc.
英文描述: 50 HZ GENERATOR
中文描述: 50赫茲發電機
文件頁數: 2/3頁
文件大?。?/td> 19K
代理商: ELM446SM
ELM446
< http://www.elmelectronics.com/ >
Pin Descriptions
Ordering Information
These integrated circuits are available in either the 300 mil plastic DIP format, or in the 200 mil SOIC surface
mount type of package. To order, add the appropriate suffix to the part number:
300 mil Plastic DIP............................... ELM446P
200 mil SOIC.....................................ELM446SM
2 of 3
Absolute Maximum Ratings
Storage Temperature.......................-65°C to +150°C
Ambient Temperature with
Power Applied....................................-40°C to +85°C
Voltage on V
DD
with respect to V
SS
............0 to +7.5V
Voltage on any other pin with
respect to V
SS
........................... -0.6V to (V
DD
+ 0.6V)
Note:
Stresses beyond those listed here will likely damage
the device. These values are given as a design
guideline only. The ability to operate to these levels
is neither inferred nor recommended.
All rights reserved. Copyright 1999 Elm Electronics.
Every effort is made to verify the accuracy of information provided in this document, but no representation or warranty can be
given and no liability assumed by Elm Electronics with respect to the accuracy and/or use of any products or information
described in this document. Elm Electronics will not be responsible for any patent infringements arising from the use of these
products or information, and does not authorize or warrant the use of any Elm Electronics product in life support devices and/or
systems. Elm Electronics reserves the right to make changes to the device(s) described in this document in order to improve
reliability, function, or design.
V
DD
(pin 1)
This pin is the positive supply pin, and should
always be the most positive point in the circuit.
Internal circuitry connected to this pin is used to
provide power on reset of the microprocessor, so
an external reset signal is not required. Refer to
the Electrical Characteristics section for further
information.
XT1 (pin 2) and XT2 (pin 3)
A 3.579545MHz NTSC television colourburst
crystal is connected between these two pins.
Crystal loading capacitors (typically 27pF) will
also normally be connected between each of the
pins and V
SS
.
reset (pin 4)
This pin can optionally be used to reset the
circuit by applying a logic low level to it. While
held low, all outputs are placed in an open or
tristate condition. If unused, this pin should be
left open (as a pullup resistor is provided) or
connected to V
DD
.
50Hz (pin 6) and 50Hz (pin 5)
These
pins
outputs. Each has a nominal 50% duty cycle.
provide
complementary
50Hz
1Hz (pin 7)
The output on this pin is a 1Hz 50% duty cycle
signal.
V
SS
(pin 8)
Circuit common is connected to this pin. This is
the most negative point in the circuit.
ELM446DSB
相關PDF資料
PDF描述
ELM900 WHITE LED FLASHLIGHT DRIVER
ELM900X WHITE LED FLASHLIGHT DRIVER
ELS-431GWA 0.39 SINGLE DIGIT DISPLAYS
ELT-512GWB ELT-512GWB
EM10DIN Energy Management Energy Meter
相關代理商/技術參數
參數描述
ELM-4-4MM 制造商:Bivar 功能描述:
ELM-4-500 制造商:Bivar 功能描述:
ELM452 制造商:EVERLIGHT 制造商全稱:Everlight Electronics Co., Ltd 功能描述:5 PIN SOP HIGH SPEED 1Mbit/s
ELM452(TA)-V 制造商:EVERLIGHT 制造商全稱:Everlight Electronics Co., Ltd 功能描述:5 PIN SOP HIGH SPEED 1Mbit/s
ELM452(TB)-V 制造商:EVERLIGHT 制造商全稱:Everlight Electronics Co., Ltd 功能描述:5 PIN SOP HIGH SPEED 1Mbit/s