- 您現在的位置：買賣IC網 > PDF目錄5253 > EL9211IWZ-T7A (Intersil)IC AMP 1CH 100MHZ 100MA SOT23-5 PDF資料下載
參數資料
| 型號： | EL9211IWZ-T7A |
| 廠商： | Intersil |
| 文件頁數： | 10/11頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC AMP 1CH 100MHZ 100MA SOT23-5 |
| 標準包裝： | 250 |
| 放大器類型： | 電壓反饋 |
| 電路數： | 1 |
| 轉換速率： | 115 V/µs |
| 增益帶寬積： | 63MHz |
| -3db帶寬： | 130MHz |
| 電流 - 輸入偏壓： | 1.4µA |
| 電壓 - 輸入偏移： | 1000µV |
| 電流 - 電源： | 2.3mA |
| 電流 - 輸出 / 通道： | 300mA |
| 電壓 - 電源，單路/雙路(±)： | 5 V ~ 13.5 V，±2.5 V ~ 6.75 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | SC-74A，SOT-753 |
| 供應商設備封裝： | SOT-23-5 |
| 包裝： | 帶卷 (TR) |
8
FN7007.1
August 10, 2007
Application Information
Product Description
The EL9211, EL9212, and EL9214 voltage feedback
amplifiers are fabricated using a high voltage CMOS
process. They exhibit rail-to-rail input and output capability,
are unity gain stable and have low power consumption
(2.4mA per amplifier). These features make the EL9211,
EL9212, and EL9214 ideal for a wide range of general-
purpose applications. Connected in voltage follower mode
and driving a load of 10K, the EL9211, EL9212, and EL9214
have a -3dB bandwidth of 130MHz while maintaining a
115V/s slew rate. The EL9211 is a single amplifier, EL9212
is a dual amplifier, and EL9214 is a quad amplifier.
Operating Voltage, Input, and Output
The EL9211, EL9212, and EL9214 are specified with a
single nominal supply voltage from 5V to 13.5V or a split
supply with its total range from 5V to 13.5V. Most EL9211,
EL9212, and EL9214 specifications are stable over both the
full supply range and operating temperatures of -40°C to
+85°C. Parameter variations with operating voltage and/or
temperature are shown in the typical performance curves.
Short Circuit Current Limit
The EL9211, EL9212, and EL9214 will limit the short circuit
current to 300mA if the output is directly shorted to the
positive or negative supply. If an output is shorted
indefinitely, the power dissipation could easily increase such
that the device may be damaged. Maximum reliability is
maintained if the output continuous current never exceeds
±65mA. This limit is set by the design of the internal metal
interconnects.
Output Phase Reversal
The EL9211, EL9212, and EL9214 are immune to phase
reversal as long as the input voltage is limited from
-VS -0.5V to +VS +0.5V. Although the device's output will not
change phase, the input's over-voltage should be avoided. If
an input voltage exceeds supply voltage by more than 0.6V,
electrostatic protection diodes placed in the input stage of
the device begin to conduct and over-voltage damage could
occur.
Unused Amplifiers
It is recommended that any unused amplifiers in a dual and
quad package be configured as a unity gain follower. The
inverting input should be directly connected to the output
and the non-inverting input tied to the ground plane.
Power Supply Bypassing and Printed Circuit
Board Layout
The EL9211, EL9212, and EL9214 can provide gain at high
frequency. As with any high-frequency device, good printed
circuit board layout is necessary for optimum performance.
Ground plane construction is highly recommended, lead
lengths should be as short as possible and the power supply
pins must be well bypassed to reduce the risk of oscillation.
For normal single supply operation, where the -VS pin is
connected to ground, a 0.1F ceramic capacitor should be
placed from +VS to pin and -VS to pin. A 4.7F tantalum
capacitor should then be connected in parallel, placed in the
region of the amplifier. One 4.7F capacitor may be used for
multiple devices. This same capacitor combination should be
placed at each supply pin to ground if split supplies are to be
used.
EL9211, EL9212, EL9214
相關PDF資料 |
PDF描述 |
|---|---|
| EL9211IWZ-T7 | IC AMP 1CH 100MHZ 100MA SOT23-5 |
| EL8403IU-T13 | IC AMP QUAD R-R 500MHZ 16-QSOP |
| EL8403IS-T13 | IC AMP QUAD R-R 500MHZ 14-SOIC |
| 7022.0510 | A12FA 500V FUSE 125MA FF |
| EL8401IU-T13 | IC AMP QUAD R-R 200MHZ 16-QSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| EL9211IYEZ | 功能描述:IC AMP SGL 100MHZ 100MA 8-HMSOP RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:50 系列:- 放大器類型:通用 電路數:2 輸出類型:滿擺幅 轉換速率:1.8 V/µs 增益帶寬積:6.5MHz -3db帶寬:4.5MHz 電流 - 輸入偏壓:5nA 電壓 - 輸入偏移:100µV 電流 - 電源:65µA 電流 - 輸出 / 通道:35mA 電壓 - 電源，單路/雙路(±):1.8 V ~ 5.25 V，±0.9 V ~ 2.625 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:10-TFSOP，10-MSOP（0.118"，3.00mm 寬） 供應商設備封裝:10-MSOP 包裝:管件 |
| EL9211IYEZ-T13 | 功能描述:IC AMP 1CH 100MHZ 100MA 8-HMSOP RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:50 系列:LinCMOS™ 放大器類型:通用 電路數:4 輸出類型:- 轉換速率:0.05 V/µs 增益帶寬積:110kHz -3db帶寬:- 電流 - 輸入偏壓:0.7pA 電壓 - 輸入偏移:210µV 電流 - 電源:57µA 電流 - 輸出 / 通道:30mA 電壓 - 電源，單路/雙路(±):3 V ~ 16 V，±1.5 V ~ 8 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:14-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:14-SOIC 包裝:管件 產品目錄頁面:865 (CN2011-ZH PDF) 其它名稱:296-1834296-1834-5 |
| EL9211IYEZ-T7 | 功能描述:IC AMP 1CH 100MHZ 100MA 8-HMSOP RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:50 系列:LinCMOS™ 放大器類型:通用 電路數:4 輸出類型:- 轉換速率:0.05 V/µs 增益帶寬積:110kHz -3db帶寬:- 電流 - 輸入偏壓:0.7pA 電壓 - 輸入偏移:210µV 電流 - 電源:57µA 電流 - 輸出 / 通道:30mA 電壓 - 電源，單路/雙路(±):3 V ~ 16 V，±1.5 V ~ 8 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:14-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:14-SOIC 包裝:管件 產品目錄頁面:865 (CN2011-ZH PDF) 其它名稱:296-1834296-1834-5 |
| EL9212 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:100MHz 100mA VCOM Amplifiers |
| EL9212IYEZ | 功能描述:IC AMP DUAL 100MHZ 100MA 8-HMSOP RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:50 系列:- 放大器類型:通用 電路數:2 輸出類型:滿擺幅 轉換速率:1.8 V/µs 增益帶寬積:6.5MHz -3db帶寬:4.5MHz 電流 - 輸入偏壓:5nA 電壓 - 輸入偏移:100µV 電流 - 電源:65µA 電流 - 輸出 / 通道:35mA 電壓 - 電源，單路/雙路(±):1.8 V ~ 5.25 V，±0.9 V ~ 2.625 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:10-TFSOP，10-MSOP（0.118"，3.00mm 寬） 供應商設備封裝:10-MSOP 包裝:管件 |
發布緊急采購，3分鐘左右您將得到回復。