- 您現在的位置：買賣IC網 > PDF目錄3524 > EL5100IW-T7 (Intersil)IC OP AMP HS V-FEEDBACK SOT23-6 PDF資料下載
參數資料
| 型號： | EL5100IW-T7 |
| 廠商： | Intersil |
| 文件頁數： | 4/15頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC OP AMP HS V-FEEDBACK SOT23-6 |
| 標準包裝： | 1 |
| 放大器類型： | 電壓反饋 |
| 電路數： | 1 |
| 轉換速率： | 2200 V/µs |
| -3db帶寬： | 200MHz |
| 電流 - 輸入偏壓： | 2µA |
| 電壓 - 輸入偏移： | 1000µV |
| 電流 - 電源： | 2.5mA |
| 電流 - 輸出 / 通道： | 100mA |
| 電壓 - 電源，單路/雙路(±)： | 3.3 V ~ 12 V，±1.65 V ~ 6 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | SOT-23-6 |
| 供應商設備封裝： | SOT-23-6 |
| 包裝： | 剪切帶 (CT) |
| 其它名稱： | EL5100IW-T7CT |
12
FN7330.3
May 3, 2007
The reason for that is the very small but not zero value serial
inductance of the capacitor.
The capacitor will behave as a capacitor up to its resonance
frequency, above the resonance frequency it will behave as
an inductor.
Just 1nHy inductance serial with 1nF capacitance will have
serial resonance at:
C = 1nF, L = 1nHy, F = 159 MHz
And an other 1nHy is very easy to get together with the
inductance of traces on the pcb, and therefore you could
encounter resonances from ca 50MHz and above anywhere.
So if the amplifier has a bandwidth of a few hundred MHz,
the proper power supply by-pass could become a serious if
not difficult task.
Intuitively, you would use capacitors value 0.1F parallel
with a few F tantalum, and to cure the effect of it’s serial
resonance put a smaller one parallel to it.
The result will surprise to you, because you will get even
something worse than without the small capacitor.
What is happening there? Just look what we get:
Above its serial resonance C2* the ideal capacitance of C2 is
a short, the Tantalum capacitor for high frequencies is not
effective, the left over is C1 capacitor and L1 + L2 inductors,
we get a parallel tank circuit, which is at it’s resonance a high
impedance path and do not carry any high frequency
current, it does not work as bypass at all!
The impedance of a parallel tank circuit at resonance is
dependent from it’s Q. High Q high impedance.
The Q of a parallel tank circuit could be reduced by
bypassing it with a resistor, or adding a resistor in serial to
one of the reactive components. Since the bypassing would
short the DC supply we do have to go to add resistor in serial
to the reactive component, we will ad a resistor serial with
the inductor. (See Figure 33.)
The final power supply bypass circuit will look:
FIGURE 31.
Ci
Li
Z
F
F RES
IN
DUCTIVE
CA
P
ACITIVE
C
L
2
1
F
×
π
=
C1
1n
C3
22F
C2
0.1F
L2
L1
C1
1n
C3
22F
C2
0.1F
=
<
FIGURE 32.
C3
0.1F
L3
C1
Z
F
F RES
R3 = 3
R3 = 0
R3
2 to 3
Ω
FIGURE 33.
C1
1n
C11
22F
R10
3R3
C12
33nF
Vs+
FIGURE 34.
EL5100, EL5101, EL5300
相關PDF資料 |
PDF描述 |
|---|---|
| AD8664ARZ-REEL7 | IC OPAMP GP R-R CMOS 4MHZ 14SOIC |
| C1S 3.5 | FUSE 3.5A 63V 1206 SLOW C1S |
| LT6200IS6#TRMPBF | IC OPAMP R-R I/O 165MHZ SOT23-6 |
| OP262GS-REEL7 | IC OPAMP GP R-R 15MHZ DUAL 8SOIC |
| LTC6079CGN | IC OP AMP QUAD R-R I/O 16SSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| EL5100IW-T7A | 功能描述:IC OP AMP HS V-FEEDBACK SOT23-6 RoHS:否 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:1,000 系列:- 放大器類型:電壓反饋 電路數:4 輸出類型:滿擺幅 轉換速率:33 V/µs 增益帶寬積:20MHz -3db帶寬:30MHz 電流 - 輸入偏壓:2nA 電壓 - 輸入偏移:3000µV 電流 - 電源:2.5mA 電流 - 輸出 / 通道:30mA 電壓 - 電源，單路/雙路(±):4.5 V ~ 16.5 V，±2.25 V ~ 8.25 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:14-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:14-SOIC 包裝:帶卷 (TR) |
| EL5101 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:200MHz Slew Enhanced VFA |
| EL5101IC-T7 | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:200MHz Slew Enhanced VFA |
| EL5101IC-T7A | 制造商:INTERSIL 制造商全稱:Intersil Corporation 功能描述:200MHz Slew Enhanced VFA |
| EL5101IW-T7 | 功能描述:運算放大器 - 運放 HS V-FEEDBACK RoHS:否 制造商:STMicroelectronics 通道數量:4 共模抑制比（最小值）:63 dB 輸入補償電壓:1 mV 輸入偏流（最大值）:10 pA 工作電源電壓:2.7 V to 5.5 V 安裝風格:SMD/SMT 封裝 / 箱體:QFN-16 轉換速度:0.89 V/us 關閉:No 輸出電流:55 mA 最大工作溫度:+ 125 C 封裝:Reel |
發布緊急采購，3分鐘左右您將得到回復。