
Pb
RoHS
EC2720ETTTS-100.000M TR
EC27 20 ET T TS -100.000M TR
Series
RoHS Compliant (Pb-free) 2.5V 4 Pad 5x7mm Ceramic
SMD LVCMOS Oscillator
Frequency Tolerance/Stability
±20ppm Maximum
Operating Temperature Range
-40°C to +85°C
Duty Cycle
50 ±5(%)
Packaging Options
Tape & Reel
Nominal Frequency
100.000MHz
Pin 1 Connection
Tri-State (High Impedance)
ELECTRICAL SPECIFICATIONS
Nominal Frequency
100.000MHz
Frequency Tolerance/Stability
±20ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the
Operating Temperature Range, Supply Voltage Change, Ouput Load Change, First Year Aging at 25°C,
Shock, and Vibration)
Aging at 25°C
±5ppm/year Maximum
Operating Temperature Range
-40°C to +85°C
Supply Voltage
2.5Vdc ±5%
Input Current
15mA Maximum
Output Voltage Logic High (Voh)
90% of Vdd Minimum (IOH = -4mA)
Output Voltage Logic Low (Vol)
10% of Vdd Maximum (IOL = +4mA)
Rise/Fall Time
3nSec Maximum (Measured at 20% to 80% of waveform)
Duty Cycle
50 ±5(%) (Measured at 50% of waveform)
Load Drive Capability
15pF Maximum
Output Logic Type
CMOS
Pin 1 Connection
Tri-State (High Impedance)
Tri-State Input Voltage (Vih and Vil)
90% of Vdd Minimum or No Connect to Enable Output, 10% of Vdd Maximum to Disable Output (High
Impedance)
Standby Current
10A Maximum (Disabled Output, High Impedance)
RMS Phase Jitter
1pSec Maximum (12kHz to 20MHz offset frequency)
Start Up Time
10mSec Maximum
Storage Temperature Range
-55°C to +125°C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility
MIL-STD-883, Method 3015, Class 1, HBM: 1500V
Fine Leak Test
MIL-STD-883, Method 1014, Condition A
Flammability
UL94-V0
Gross Leak Test
MIL-STD-883, Method 1014, Condition C
Mechanical Shock
MIL-STD-883, Method 2002, Condition B
Moisture Resistance
MIL-STD-883, Method 1004
Moisture Sensitivity
J-STD-020, MSL 1
Resistance to Soldering Heat
MIL-STD-202, Method 210, Condition K
Resistance to Solvents
MIL-STD-202, Method 215
Solderability
MIL-STD-883, Method 2003
Temperature Cycling
MIL-STD-883, Method 1010, Condition B
Vibration
MIL-STD-883, Method 2007, Condition A
www.ecliptek.com | Specification Subject to Change Without Notice | Rev M 3/11/2011 | Page 1 of 6