參數資料
型號: DS4000GF/WBGA
廠商: Maxim Integrated Products
文件頁數: 4/16頁
文件大?。?/td> 0K
描述: IC OSC TCXO 16.384MHZ 24-BGA
標準包裝: 135
類型: 溫度 - 補償晶體振蕩器(TCXO)
頻率: 16.384MHz
電源電壓: 4.75 V ~ 5.25 V
電流 - 電源: 1.5mA
工作溫度: 0°C ~ 70°C
封裝/外殼: 24-BBGA
包裝: 托盤
供應商設備封裝: 24-WBGA(11x9)
安裝類型: 表面貼裝
DS4000 Digitally Controlled TCXO
12 of 16
Figure 3. Data Transfer On 2-Wire Serial Bus
DATA TRANSFER
Figures 4 and 5 detail how data transfer is accomplished on the 2-wire bus.
Depending on the R/
W bit in the transmission protocols as shown, two types of data transfer are possible:
1) Data transfer from a master transmitter to a slave receiver. The first byte transmitted by the master is the
slave address. Next follows a number of data bytes. The slave returns an acknowledge bit after each received
byte. Data is transferred with the most significant bit (MSB) first.
2) Data transfer from a slave transmitter to a master receiver. The master transmits the first byte (the slave
address). The slave then returns an acknowledge bit. Next follows a number of data bytes transmitted by the
slave to the master. The master returns an acknowledge bit after all received bytes other than the last byte. At
the end of the last received byte, a “not acknowledge” is returned. The master device generates all of the serial
clock pulses and the START and STOP conditions. A transfer is ended with a STOP condition or with a
repeated START condition. Since a repeated START condition is also the beginning of the next serial transfer,
the bus is not released.
12
3-5
6789
SDA
SCL
START
CONDITION
STOP CONDITION
OR REPEATED
START CONDITION
89
3-7
12
ACK
REPEATED IF
MORE BYTES ARE
TRANSFERRED
MSB
SLAVE
ADDRESS
R/W BIT
ACKNOWLEDGEMENT
SIGNAL FROM
RECEIVER
ACKNOWLEDGEMENT
SIGNAL FROM
RECEIVER
相關PDF資料
PDF描述
DS4000GFN/WBGA IC OSC TCXO 16.384MHZ 24-BGA
AD8402ARUZ1 IC POT DIG 8BIT DUAL 1K 14-TSSOP
FST16211MTD IC SWITCH BUS 24BIT TTL 56TSSOP
AD5272BRMZ-100 IC RHEOSTAT 5V 50TP 1024 10MSOP
AD5270BRMZ-20 IC DGTL POT 20K 1024POS 10MSOP
相關代理商/技術參數
參數描述
DS4000GW/WBGA 功能描述:IC OSC TCXO 16.8MHZ 24-BGA RoHS:否 類別:集成電路 (IC) >> 時鐘/計時 - 可編程計時器和振蕩器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:45 系列:- 類型:溫度 - 補償晶體振蕩器(TCXO) 計數:- 頻率:25MHz 電源電壓:3.135 V ~ 3.465 V 電流 - 電源:1.5mA 工作溫度:-40°C ~ 85°C 封裝/外殼:16-SOIC(0.295",7.50mm 寬) 包裝:管件 供應商設備封裝:16-SOIC W 安裝類型:表面貼裝
DS4000GWN/WBGA 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:
DS4000KI/WBGA 功能描述:TCXO振蕩器 RoHS:否 制造商:AVX 封裝 / 箱體: 頻率:32.768 kHz 頻率穩定性: 負載電容:15 pF 端接類型:SMD/SMT 電源電壓:3 V 尺寸:2.5 mm W x 3.2 mm L x 1 mm H 輸出格式:CMOS 最小工作溫度:- 40 C 最大工作溫度:+ 85 C 封裝:Reel
DS4000KIN/WBGA 制造商:Maxim from Components Direct 功能描述:MAXIM DS4000KIN/WBGA OSCILLATORS - Trays 制造商:Maxim 功能描述:Maxim DS4000KIN/WBGA Oscillators
DS4000N 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:Digitally Controlled TCXO