
DS2782: Stand-Alone Fuel Gauge IC 
18 of 25 
CONTROL REGISTER 
All CONTROL register bits are read and write accessible. The CONTROL register is recalled from Parameter 
EEPROM memory at power-up. Register bit values can be modified in shadow RAM after power-up. Shadow RAM 
values can be saved as the power up default values by using the Copy Data command.  
Figure 15. Control Register Format 
Address 
60h 
Field 
Bit 
Format 
Allowable Values 
Reserved 
7 
Undefined 
Under Voltage SLEEP Enable 
0: Disables transition to SLEEP mode based on VIN voltage 
1: Enables transition to SLEEP mode if, 
VIN < V
SLEEP
  AND  SDA, SCL stable at either logic level for t
SLEEP
Power Mode Enable 
0: Disables transition to SLEEP mode based on SDA, SCL logic state 
1: Enables transition to SLEEP mode if SDA, SCL at a logic low for 
t
SLEEP
Reserved 
0:4 
Undefined 
SPECIAL FEATURE REGISTER 
All Special Feature Register bits are read and write accessible, with default values specified in each bit definition.
Figure 16. Special Feature Register Format 
Address 
15h 
Field 
Bit 
Format 
Allowable Values 
Reserved 
2:7 
Undefined 
Slave Address Write Enable 
0: Disables writes to the Slave Address Register 
1: Enables writes to the Slave Address Register 
Power-up default: 0 (writes disabled) 
PIO Sense and Control 
Read values 
0: PIO pin 
≤
 Vil 
1: PIO pin 
≥
 Vih 
Write values 
0: Activates PIO pin open-drain output driver, forcing the PIO pin low 
1: Disables the output driver, allowing the PIO pin to be pulled high or 
used as an input 
Power-up and SLEEP mode default: 1 (PIO pin is hi-Z) 
Note: PIO pin has weak pulldown 
EEPROM REGISTER 
The EEPROM register provides access control of the EEPROM blocks. EEPROM blocks can be locked to prevent 
alteration of data within the block. Locking a block disables write access to the block. Once a block is locked, it 
cannot be unlocked. Read access to EEPROM blocks is unaffected by the lock/unlock status. 
Bit Definition 
UVEN 
6 
Read/Write 
PMOD 
5 
Read/Write 
Bit Definition 
SAWE 
1 
Read/Write 
PIOSC 
0 
Read/Write