參數資料
型號: DS1500YN
廠商: DALLAS SEMICONDUCTOR
元件分類: Timer or RTC
英文描述: REAL TIME CLOCK, PDIP32
封裝: DIP-32
文件頁數: 5/25頁
文件大?。?/td> 214K
代理商: DS1500YN
DS1500/DS1510
13 of 25
PAB - Power Active Bar Control Bit (0 EH bit 4)
When this bit is "0", the PWR pin is in the active low state. When this bit is "1", the PWR pin is in the
high impedance state. This bit can be written to a "1" or "0" by the user. If either WF AND WIE = "1" OR
KF AND KSE = "1", the PAB bit will be cleared to a "0".
TDF - Time of Day/Date Alarm Flag (0 EH bit 3)
A "1" in the TDF bit indicates that the current time has matched the alarm time. If the TIE bit is also a
"1", the IRQ pin will go low and a "1" will appear in the IRQF bit.
KSF - Kickstart Flag (0 EH bit 2)
This bit is set to a "1" when a kickstart condition occurs or when the user writes it to a "1". This bit is
cleared by writing it to a "0".
WDF - Watchdog Flag (0 EH bit 1)
If the processor does not access the DS1500/DS1510 with a write within the period specified in addresses
0CH and 0DH, the WDF bit will be set to a "1". WDF is cleared by writing it to a "0".
IRQF - Interrupt Request Flag (0 EH bit 0)
The Interrupt Request Flag (IRQF) bit is set to a "1" when one or more of the following are true:
TDF = TIE = "1"
KSF = KIE = "1"
WDF = WDE = "1"
i.e., IRQF = (TDF
TIE) + (KSF KIE) + (WDF WDE)
Any time the IRQF bit is a "1", the IRQ pin is driven low.
TE - Transfer Enable Bit (0 FH bit 7)
When the TE bit is a "1", the update transfer functions normally by advancing the counts once per second.
When the TE bit is written to a "0", any update transfer is inhibited and the program can initialize the time
and calendar bytes without an update occurring in the midst of initializing. Read cycles can be executed in
a similar manner. TE is a read/write bit that is not modified by internal functions of the DS1500/DS1510.
CS - Crystal Select Bit (0 FH bit 6)
When CS is set to a "0", the oscillator is configured for operation with a crystal that has a 6 pF specified
load capacitance. When CS="1", the oscillator is configured for a 12.5 pF crystal. CS is disabled in the
DS1510 module and should be set to CS="0".
BME - Burst Mode Enable Bit (0 FH bit 5)
The burst mode enable bit allows the extended user RAM address registers to automatically increment for
consecutive reads and writes. When BME is set to a "1", the automatic incrementing will be enabled and
when BME is set to a "0", the automatic incrementing will be disabled.
TPE - Time of Day/Date Alarm Power Enable Bit (0 FH bit 4)
The wake up feature is controlled through the TPE bit. When the TDF flag bit is set to a "1", if TPE is a
"1", the PWR pin will be driven active. Therefore, setting TPE to "1" enables the wake up feature.
Writing a "0" to TPE disables the wake up feature.
TIE - Time of Day/Date Alarm Interrupt Enable Bit (0 FH bit 3)
相關PDF資料
PDF描述
DS1501WN 1 TIMER(S), REAL TIME CLOCK, PDIP28
DS1501YN 1 TIMER(S), REAL TIME CLOCK, PDIP28
DS1501WEN 1 TIMER(S), REAL TIME CLOCK, PDSO28
DS1501WSN 1 TIMER(S), REAL TIME CLOCK, PDSO28
DS1501YEN 1 TIMER(S), REAL TIME CLOCK, PDSO28
相關代理商/技術參數
參數描述
DS1501 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:Y2K-Compliant Watchdog Real-Time Clocks
DS1501_09 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:Y2K-Compliant Watchdog Real-Time Clocks
DS1501-7R 功能描述:EURO-CASSETTE 100W 15V RoHS:否 類別:電源 - 外部/內部(非板載) >> DC DC Converters 系列:* 標準包裝:1 系列:Quint 類型:隔離 輸入電壓:24V 輸出:24V 輸出數:1 輸出 - 1 @ 電流(最大):24 VDC @ 50A 輸出 - 2 @ 電流(最大):- 輸出 - 3 @ 電流(最大):- 輸出 - 4 @ 電流(最大):- 功率(瓦特):1200W 安裝類型:底座安裝 工作溫度:0°C ~ 40°C 效率:- 封裝/外殼:模塊 尺寸/尺寸:4.33" L x 9.09" W x 6.14" H(110mm x 231mm x 156mm) 包裝:散裝 電源(瓦特)- 最大:1200W 批準:- 其它名稱:277-69722866365-NDQUINT-BAT/24DC/12AH
DS1501-DS1511 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:Y2K-Compliant Watchdog Real-Time Clocks
DS1501W 功能描述:IC RTC WDOG Y2KC 3.3V 28-DIP RoHS:否 類別:集成電路 (IC) >> 時鐘/計時 - 實時時鐘 系列:- 產品培訓模塊:Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:時鐘/日歷 特點:警報器,閏年,SRAM 存儲容量:- 時間格式:HH:MM:SS(12/24 小時) 數據格式:YY-MM-DD-dd 接口:SPI 電源電壓:2 V ~ 5.5 V 電壓 - 電源,電池:- 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-WDFN 裸露焊盤 供應商設備封裝:8-TDFN EP 包裝:管件