參數資料
型號: DS1486P-120
廠商: DALLAS SEMICONDUCTOR
元件分類: Timer or RTC
英文描述: 1 TIMER(S), REAL TIME CLOCK, DMA34
封裝: POWERCAP MODULE BOARD-34
文件頁數: 11/17頁
文件大?。?/td> 477K
代理商: DS1486P-120
DS1486/DS1486P
3 of 17
DATA RETENTION
The RAMified Timekeeper provides full functional capability when VCC is greater than 4.5 volts and
write-protects the register contents at 4.25 volts typical. Data is maintained in the absence of VCC without
any additional support circuitry. The DS1486 constantly monitors VCC. Should the supply voltage decay,
the RAMified Timekeeper will automatically write-protect itself and all inputs to the registers become
“don’t care.” The two interrupts INTA and INTB (INTB) and the internal clock and timers continue to run
regardless of the level of VCC. However, it is important to insure that the pull-up resistors used with the
interrupt pins are never pulled up to a value that is greater than VCC + 0.3V. As VCC falls below
approximately 3.0 volts, a power switching circuit turns the internal lithium energy source on to maintain
the clock and timer data functionality. It is also required to insure that during this time (battery backup
mode), the voltage present at INTA and INTB (INTB) never exceeds VBAT. During power-up, when VCC
rises above approximately 3.0 volts, the power switching circuit connects external VCC and disconnects
the internal lithium energy source. Normal operation can resume after VCC exceeds 4.5 volts for a period
of 200 ms.
RAMIFIED TIMEKEEPER REGISTERS
The RAMified Timekeeper has 14 registers which are 8 bits wide that contain all of the timekeeping,
alarm, watchdog and control information. The clock, calendar, alarm, and watchdog registers are memory
locations which contain external (user-accessible) and internal copies of the data. The external copies are
independent of internal functions except that they are updated periodically by the simultaneous transfer of
the incremented internal copy (see Figure 1). The Command Register bits are affected by both internal
and external functions. This register will be discussed later. Registers 0, 1, 2, 4, 6, 8, 9, and A contain
time of day and date information (see Figure 2). Time of day information is stored in BCD. Registers 3,
5, and 7 contain the Time of Day Alarm information. Time of Day Alarm information is stored in BCD.
Register B is the Command Register and information in this register is binary. Registers C and D are the
Watchdog Alarm Registers and information which is stored in these two registers is in BCD. Registers E
through 1FFFF are user bytes and can be used to maintain data at the user’s discretion.
CLOCK ACCURACY (DIP MODULE)
The DS1486 is guaranteed to keep time accuracy to within
±1 minute per month at 25°C.
CLOCK ACCURACY (POWERCAP MODULE)
The DS1486P and DS9034PCX are each individually tested for accuracy. Once mounted together, the
module is guaranteed to keep time accuracy to within ±1.53 minutes per month (35 ppm) at 25°C.
相關PDF資料
PDF描述
DS1500WEN 1 TIMER(S), REAL TIME CLOCK, PDSO32
DS1500WE REAL TIME CLOCK, PDSO32
DS1500W REAL TIME CLOCK, PDIP32
DS1500WN REAL TIME CLOCK, PDIP32
DS1500YE REAL TIME CLOCK, PDSO32
相關代理商/技術參數
參數描述
DS1486P-120+ 功能描述:實時時鐘 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube
DS1486P-150 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:RAMified Watchdog Timekeeper
DS1487 制造商:NSC 制造商全稱:National Semiconductor 功能描述:Low Power RS-485 1⁄4 Unit Load Multipoint Transceiver
DS1487M 功能描述:RS-422/RS-485 接口 IC RoHS:否 制造商:Maxim Integrated 數據速率:1136 Kbps 工作電源電壓:3 V to 5.5 V 電源電流:5.9 mA 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-28 封裝:Tube
DS1487M/NOPB 功能描述:RS-422/RS-485 接口 IC LO PR RS485/1/4 UNIT LOAD MULTIPT XCVR RoHS:否 制造商:Maxim Integrated 數據速率:1136 Kbps 工作電源電壓:3 V to 5.5 V 電源電流:5.9 mA 工作溫度范圍:- 40 C to + 85 C 安裝風格:SMD/SMT 封裝 / 箱體:SOIC-28 封裝:Tube