- 您現在的位置：買賣IC網 > PDF目錄376952 > DS1395 RAMified Real Time Clock PDF資料下載
參數資料
| 型號： | DS1395 |
| 英文描述： | RAMified Real Time Clock |
| 中文描述： | 網狀實時時鐘 |
| 文件頁數： | 7/19頁 |
| 文件大小： | 193K |
| 代理商： | DS1395 |
DS1395/DS1397
020794 7/19
TIME, CALENDAR AND ALARM DATA MODES
Table 1
ADDRESS
LOCATION
FUNCTION
DECIMAL
RANGE
RANGE
BINARY DATA MODE
BCD DATA MODE
0
Seconds
0-59
00-3B
00-59
1
Seconds Alarm
0-59
00-3B
00-59
2
Minutes
0-59
00-3B
00-59
3
Minutes Alarm
0-59
00-3B
00-59
4
Hours-12-hr Mode
1-12
01-0C AM, 81-8C PM
01-12AM,81-92PM
Hours-24-hr Mode
0-23
00-17
00-23
5
Hours Alarm-12-hr
1-12
01-0C AM, 81-8C PM
01-12AM,81-92PM
Hours Alarm-24-hr
0-23
00-17
00-23
6
Day of the Week
Sunday = 1
1-7
01-07
01-07
7
Date of the Month
1-31
01-1F
01-31
8
Month
1-12
01-0C
01-12
9
Year
0-99
00-63
00-99
USER NONVOLATILE RAM - RTC
The 50 user nonvolatile RAM bytes are not dedicated to
any special function within the DS1395/DS1397. They
can be used by the application program as nonvolatile
memory and are fully available during the update cycle.
This memory is directly accessible in the RTC section.
INTERRUPTS
The RTC plus RAM includes three separate, fully auto-
matic sources of interrupt for a processor. The alarm in-
terrupt can be programmed to occur at rates from once
per second to once per day. The periodic interrupt can
be selected for rates from 500 ms to 122
μ
s. The up-
date-ended interrupt can be used to indicate to the pro-
gram that an update cycle is complete. Each of these
independent interrupt conditions is described in greater
detail in other sections of this text.
The application program can select which interrupts, if
any, are going to be used. Three bits in Register B en-
able the interrupts. Writing a logic 1 to an interrupt-en-
able bit permits that interrupt to be initiated when the
event occurs. A logic 0 in an interrupt-enable bit prohib-
its the IRQ pin from being asserted from that interrupt
condition. If an interrupt flag is already set when an in-
terrupt is enabled, IRQ is immediately set at an active
level, although the interrupt initiating the event may
have occurred much earlier. As a result, there are cases
where the program should clear such earlier initiated in-
terrupts before first enabling new interrupts.
When an interrupt event occurs, the relating flag bit is
set to logic 1 in Register C. These flag bits are set inde-
pendent of the state of the corresponding enable bit in
Register B. The flag bit can be used in a polling mode
without enabling the corresponding enable bits. When a
flag is set, an indication is given to software that an inter-
rupt event has occurred since the flag bit was last read.
However, care should be taken when using the flag bits
as they are cleared each time Register C is read.
Double latching is included with Register C so that bits
which are set remain stable throughout the read cycle.
All bits which are set (high) are cleared when read and
new interrupts which are pending during the read cycle
are held until after the cycle is completed. One, two, or
three bits can be set when reading Register C. Each uti-
lized flag bit should be examined when read to ensure
that no interrupts are lost.
The alternative flag bit usage method is with fully en-
abled interrupts. When an interrupt flag bit is set and the
corresponding interrupt enable bit is also set, the IRQ
pin is asserted low. IRQ is asserted as long as at least
one of the three interrupt sources has its flag and enable
bits both set. The IRQF bit in Register C is a one when-
ever the IRQ pin is being driven low. Determination that
相關PDF資料 |
PDF描述 |
|---|---|
| DS1395S | RAMified Real Time Clock |
| DS1402D-41 | iButton Probe Component Parts |
| DS1402 | iButton Probe Component Parts |
| DS1402D-003 | iButton Probe Component Parts |
| DS1402D-010 | iButton Probe Component Parts |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS1395N | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Peripheral IC |
| DS1395S | 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:RAMified Real Time Clock |
| DS1395SN | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Peripheral IC |
| DS1397 | 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:RAMified Real Time Clock |
| DS-14 | 功能描述:非熱縮管和套管 FLEX BRAIDED SHIELD 14MM X 100M ROLL RoHS:否 制造商:Panduit 產品:Cable Wraps 類型:Spiral 顏色:Black 材料:PP 內徑:0.03 in 長度:100 ft |
發布緊急采購，3分鐘左右您將得到回復。