- 您現在的位置：買賣IC網 > PDF目錄93259 > DS1100Z-50 (MAXIM INTEGRATED PRODUCTS INC) SILICON DELAY LINE, TRUE OUTPUT, PDSO8 PDF資料下載
參數資料
DS1100
5 of 6
TERMINOLOGY
Period: The time elapsed between the leading edge of the first pulse and the leading edge of the
following pulse.
tWI (Pulse Width): The elapsed time on the pulse between the 1.5V point on the leading edge and the
1.5V point on the trailing edge, or the 1.5V point on the trailing edge and the 1.5V point on the leading
edge.
tRISE (Input Rise Time): The elapsed time between the 20% and the 80% point on the leading edge of the
input pulse.
tFALL (Input Fall Time): The elapsed time between the 80% and the 20% point on the trailing edge of the
input pulse.
tPLH (Time Delay, Rising): The elapsed time between the 1.5V point on the leading edge of the input
pulse and the 1.5V point on the leading edge of any tap output pulse.
tPHL (Time Delay, Falling): The elapsed time between the 1.5V point on the trailing edge of the input
pulse and the 1.5V point on the trailing edge of any tap output pulse.
TEST SETUP DESCRIPTION
Figure 3 illustrates the hardware configuration used for measuring the timing parameters on the DS1100.
The input waveform is produced by a precision-pulse generator under software control. Time delays are
measured by a time interval counter (20ps resolution) connected between the input and each tap. Each tap
is selected and connected to the counter by a VHF switch control unit. All measurements are fully
automated, with each instrument controlled by a central computer over an IEEE 488 bus.
TEST CONDITIONS INPUT :
Ambient Temperature:
+25°C ±3°C
Supply Voltage (VCC):
5.0V ±0.1V
Input Pulse:
High = 3.0V ±0.1V
Low = 0.0V ±0.1V
Source Impedance:
50
W max
Rise and Fall Time:
3.0ns max (measured between 0.6V and 2.4V)
Pulse Width:
500ns (1s for -500 version)
Period:
1s (2s for -500 version)
OUTPUT:
Each output is loaded with the equivalent of one 74F04 input gate. Delay is measured at the 1.5V level on
the rising and falling edge.
NOTE:
Above conditions are for test only and do not restrict the operation of the device under other data sheet
conditions.
相關PDF資料 |
PDF描述 |
|---|---|
| DS1100M-150 | SILICON DELAY LINE, TRUE OUTPUT, PDIP8 |
| DS1101JD | PROXIMITY SENSOR-HALL EFFECT, 15.2-15.2mm, 20mA, RECTANGULAR |
| DS1101UC | PROXIMITY SENSOR-HALL EFFECT, 18.5-18.5mm, 20mA, RECTANGULAR |
| DS1101KA | PROXIMITY SENSOR-HALL EFFECT, 15.2-15.2mm, 20mA, RECTANGULAR |
| DS1101JA | PROXIMITY SENSOR-HALL EFFECT, 15.2-15.2mm, 20mA, RECTANGULAR |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS1100Z-50/T&R | 制造商:Maxim Integrated Products 功能描述:DELAY LINE 8P 5TAP 50NS SOIC TRL - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC DELAY LINE 5TAP 50NS 8SOIC 制造商:Maxim Integrated Products 功能描述:Delay Lines / Timing Elements 5-Tap Timing Element |
| DS1100Z-50/T&R+MOT | 制造商:Maxim Integrated Products 功能描述:5-TAP ECONOMY TIMING ELEMENT (DELAY LINE) - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC DELAY LINE 5TAP 50NS 8SOIC 制造商:Maxim Integrated Products 功能描述:Delay Lines / Timing Elements 5-Tap Timing Element |
| DS1100Z-50/T&R | 功能描述:延遲線/計時元素 5-Tap Timing Element RoHS:否 制造商:Micrel 功能:Active Programmable Delay Line 傳播延遲時間:1000 ps 工作溫度范圍: 封裝 / 箱體:QFN-24 封裝:Tube |
| DS1100Z-50/T&R/C607 | 功能描述:延遲線/計時元素 RoHS:否 制造商:Micrel 功能:Active Programmable Delay Line 傳播延遲時間:1000 ps 工作溫度范圍: 封裝 / 箱體:QFN-24 封裝:Tube |
| DS1100Z-50/T&R+MOT | 功能描述:延遲線/計時元素 5-Tap Timing Element RoHS:否 制造商:Micrel 功能:Active Programmable Delay Line 傳播延遲時間:1000 ps 工作溫度范圍: 封裝 / 箱體:QFN-24 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。