
3.3V Spread-Spectrum EconOscillator
2
Maxim Integrated
DS1086L
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED DC OPERATING CONDITIONS
(VCC = 2.7V to 3.6V, TA = -40°C to +85°C.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Supply Voltage
VCC
(Note 1)
2.7
3.3
3.6
V
High-Level Input Voltage
(SDA, SCL, SPRD, PDN, OE)
VIH
0.7 x
VCC
VCC +
0.3
V
Low-Level Input Voltage
(SDA, SCL SPRD, PDN, OE)
VIL
-0.3
0.3 x
VCC
V
DC ELECTRICAL CHARACTERISTICS
(VCC = 2.7V to 3.6V, TA = -40°C to +85°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
High-Level Output Voltage (OUT)
VOH
IOH = -4mA, VCC = min
2.4
V
Low-Level Output Voltage (OUT)
VOL
IOL = 4mA
0
0.4
V
VOL1
3mA sink current
0
0.4
Low-Level Output Voltage (SDA)
VOL2
6mA sink current
0
0.6
V
High-Level Input Current
IIH
VCC = 3.6V
1
μA
Low-Level Input Current
IIL
VIL = 0V
-1
μA
Supply Current (Active)
ICC
10
mA
Standby Current (Power-Down)
ICCQ
Power-down mode
10
μA
Voltage Range on VCC Relative to Ground ..........-0.5V to +6.0V
Voltage Range on SPRD, PDN, OE, SDA, and SCL
Relative to Ground* ..................................-0.5 to (VCC + 0.5V)
Continuous Power Dissipation (TA = +70°C)
μSOP (derate 4.5mW/°C above +70°C)........................362mW
Operating Temperature Range ...........................-40°C to +85°C
Programming Temperature Range .........................0°C to +70°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-55°C to +150°C
Soldering Temperature (reflow)
Lead(Pb)-free................................................................+260°C
Containing lead(Pb) ......................................................+240°C
*
This voltage must not exceed 6.0V.