- 您現在的位置：買賣IC網 > PDF目錄51457 > DADA-15S-F0 (ITT CANNON) 15 CONTACT(S), FEMALE, D SUBMINIATURE CONNECTOR, CRIMP, RECEPTACLE PDF資料下載
參數資料
| 型號： | DADA-15S-F0 |
| 廠商： | ITT CANNON |
| 元件分類： | D-微型連接器 |
| 英文描述： | 15 CONTACT(S), FEMALE, D SUBMINIATURE CONNECTOR, CRIMP, RECEPTACLE |
| 文件頁數： | 4/5頁 |
| 文件大?。?/td> | 131K |
| 代理商： | DADA-15S-F0 |
www.ittcannon.com
362
Dimensions are shown in inches (millimeters).
Dimensions subject to change.
Environmental D
D*D
Mounting Dimensions
Panel Cutouts
With both connectors rear mounted, ues #4-40
flat head screws flush with the panel (Fig. 1).
With both connectors front mounted, use #4-40
binder or pan head screws (Fig. 2).
With both connectors rear mounted (float rivets
on plug assembly side); use #4-40 flat head
scerws, flush with the panel (Fig. 3).
With both connecotrs front mounted (plug as-
sembly has float mounting screw), use #4-40
binder or pan head screws for receptacle as-
sembly (Fig. 4)
With plug assembly front mounted and recepta-
cle assembly rear mounted, use hardware from
Figures 5 and 6.
With plug assembly front mounted and recepta-
cle assembly rear mounted (plug assembly has
float mounting screw), use hardware fron figure
1 for receptacle assembly.
* Dimensions between panels represent the rec-
ommended limit to be used in the design of the
connector mounting method.
With plug assembly rear mounted and receptaccle
assembly front mounted, use hardware from
Figures 1 and 2.
With plug assembly rear mounted (float rivets)
and receptacle assembly front mounted, use
hardware from Figures 2 and 3.
Electrical contact engagement when mounted
per Figure 1 is .046 (1.17) min./.070(1.78) max.
.189 +
_ .015
(4.80 +
_ 0.38)
.292 +
_ .010
(7.42 +
_ 0.25)
.133 +
_ .010
(3.38 +
_ .025)
.324 +
_ .010
(8.23 +
_ 0.25)
.194 +
_ .008
(4.94 +
_ 0.19)
.230 +
_ .013
(5.85 +
_ 0.32)
.280 +
_ .013
(7.11 +
_ 0.32)
.230 +
_ .013
(5.85 +
_ 0.32)
4-40 NC2A THREAD
REAR
FRONT
PLUG
RECEPT
Figure 1
Figure 2
PLUG
RECEPT
Figure 3
Figure 4
PLUG
RECEPT
Figure 7
USE .120(3.05) DIA. HOLE OR 4-40 TAP (CUSTOMER PREFERENCE) FOR FRONT MOUNTING.
FOR REAR MOUNTING USE .120(3.05) DIA. HOLE COUNTERSUNK FOR FLATHEAD SCREW.
F
E
C
A
D
.083(2.11) R. MAX.
TYPICAL
Add .032 (0.81) to dimensions C and E for float mounting.
Note: Panel cutout does not allow for potting cup clearance.
Shell Size
DED-9
DAD-15
DBD-25
DCD-37
DDD-50
1.442 (36.63)
1.755 (44.58)
2.295 (58.29)
2.937 (74.60)
2.859 (72.62)
.839 (21.31)
1.157 (29.39)
1.697 (43.10)
2.357 (59.87)
2.265 (57.53)
.614 (15.60)
.735 (18.67)
.497 (12.62)
.610 (15.49)
1.125 (28.58)
1.437 (36.50)
1.993 (50.62)
2.625 (66.68)
2.531 (64.29)
A
+
_ .010 (0.25)
D
+
_ .010 (0.25)
F
+
_ .006 (0.15)
C
Min.
E
Min.
Figure 8
PLUG
RECEPT
Figure 5
Figure 6
NOTE: Max panel thickness is .125 (3.17) for
non-floating rear panel mounting.
NOTE: Float rivets are for rear mounting only and
float screw for front mounting only. (Specify when
ordering.)
1.
2.
3.
4.
5.
6.
7.
8.
9.
相關PDF資料 |
PDF描述 |
|---|---|
| DBD-25PA | 25 CONTACT(S), MALE, D SUBMINIATURE CONNECTOR, SOLDER, PLUG |
| DBD-25SA | 25 CONTACT(S), FEMALE, D SUBMINIATURE CONNECTOR, SOLDER, RECEPTACLE |
| DBDA-25P-F0 | 25 CONTACT(S), MALE, D SUBMINIATURE CONNECTOR, CRIMP, PLUG |
| DBDA-25S-F0 | 25 CONTACT(S), FEMALE, D SUBMINIATURE CONNECTOR, CRIMP, RECEPTACLE |
| DCD-37PA | 37 CONTACT(S), MALE, D SUBMINIATURE CONNECTOR, SOLDER, PLUG |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DADA2C105K | 制造商:United Chemi-Con Inc 功能描述: |
| DADA2C224K | 制造商:United Chemi-Con Inc 功能描述: |
| DADA2C225K | 制造商:United Chemi-Con Inc 功能描述: |
| DADA2C474K | 制造商:United Chemi-Con Inc 功能描述: |
| DADA2G474K | 制造商:United Chemi-Con Inc 功能描述: |
發(fā)布緊急采購，3分鐘左右您將得到回復。