
CX65001
Power Amplifier Driver
8
Skyworks – Preliminary
101466C
Proprietary Information and Specifications Are Subject to Change
September 20, 2002
C1218
6.985
1.800
0.381
1.270
M1.524
0.381 diameter plated-through via
Dimensions are in millimeters
2.710
0.635
Figure 15. PCB Mounting Footprint
C1240e
Signal Generator
Power Meter
or
Spectrum Analyzer
CX65001
Evaluation Board
Power Supply
Input
Output
Figure 16. CX65001 Evaluation Board Testing Configuration
Package Dimensions
Figure 17 shows the package dimensions for the 8-pin SOIC
and Figure 18 provides the tape and reel dimensions.
Package and Handling Information
Since the device package is sensitive to moisture absorption, it
is baked and vacuumpacked before shipping. Instructions on
the shipping container label regarding exposure to moisture
after the container seal is broken must be followed. Otherwise,
problems related to moisture absorption may occur when the
part is subjected to high temperature during solder assembly.
If the part is attached in a reflow oven, the temperature ramp
rate should not exceed 5
°
C per second. Maximumtemperature
should not exceed 225
°
C and the time spent at a temperature
that exceeds 210
°
C should be limted to less than 10 seconds.
If the part is manually attached, precaution should be taken to
ensure that the part is not subjected to a temperature that
exceeds 300
°
C for more than 10 seconds.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment. For
additional details on both attachment techniques, precautions,
and recommended handling procedures, refer to the Skyworks
document
Solder Reflow Application Note
, document number
101536.
Production quantities of this product are shipped in a standard
tape and reel format. For packaging details, refer to the
Skyworks document
Tape and Reel Information Application
Note
, document number 101568.
Electro-Static Discharge (ESD) Sensitivity
The CX65001 is a static-sensitive electronic device. Do not
operate or store near strong electrostatic fields. Take proper
ESD precautions.