- 您現在的位置：買賣IC網 > PDF目錄366875 > CP15 Direct ProTek Replacement:CP15 PDF資料下載
參數資料
| 型號： | CP15 |
| 英文描述： | Direct ProTek Replacement:CP15 |
| 中文描述： | 直接太克替代：CP15 |
| 文件頁數： | 4/5頁 |
| 文件大?。?/td> | 126K |
| 代理商： | CP15 |
4
www.protekdevices.com
CP05
thru
CP24C
05133.R5 11/02
APPLICATION NOTES
The CP Series are TVS arrays designed to protect I/O or data lines from the damaging effects of ESD (> 25kV) or EFT. This product series provides
both unidiretional and bidirectional protection, with a surge capability of 200 Watts P
PP
per line for an 8/20μs waveform.
UNIDIRECTIONAL COMMON MODE CONFIGURATION (Figure 1)
The CP Series provides up to four (4) lines of protection in a common mode configuration as depicted in Figure 1.
Circuit connectivity is as follows:
Line 1 is connected to Pin 1.
Line 2 is connected to Pin 3.
Line 3 is connected to Pin 4.
Line 4 is connected to Pin 6.
Pin 5 is connected to ground.
Pin 2 is not connected.
BIDIRECTIONAL COMMON MODE CONFIGURATION (Figure 1)
The CPxxC Series provides up to four (4) lines of protection in a common
mode configuration as depicted in Figure 2.
Circuit connectivity is as follows:
Line 1 is connected to Pin 1.
Line 2 is connected to Pin 3.
Line 3 is connected to Pin 4.
Line 4 is connected to Pin 5.
Pin 6 is connected to ground.
Pin 2 is not connected.
CIRCUIT BOARD LAYOUT RECOMMENDATIONS
Circuit board layout is critical for Electromagnetic Compat-
ibility (EMC) protection. The following guidelines are
recommended:
The protection device should be placed near the input
terminals or connectors, the device will divert the
transient current immediately before it can be coupled
into the nearby traces.
The path length between the TVS device and the
protected line should be minimized.
All conductive loops including power and ground loops
should be minimized.
The transient current return path to ground should be
kept as short as possible to reduce parasitic induc-
tance.
Ground planes should be used whenever possible.
For multilayer PCBs, use ground vias.
3
1
5
6
2
4
Figure 2 - Bidirectional Configuration
Common-Mode I/O Port Protection
LINE 1
LINE 2
LINE 3
LINE 4
I
3
1
5
6
2
4
Figure 1 - Unidirectional Configuration
Common-Mode I/O Port Protection
LINE 1
LINE 2
LINE 3
LINE 4
I
相關PDF資料 |
PDF描述 |
|---|---|
| CP15C | Direct ProTek Replacement:CP15C |
| CP24C | Direct ProTek Replacement:CP24C |
| CP05 | Direct ProTek Replacement:CP05 |
| CP24 | Direct ProTek Replacement:CP24 |
| CP1342 | TRANSISTOR | BJT | DARLINGTON | PNP | 80V V(BR)CEO | 4A I(C) | TO-220AB |
相關代理商/技術參數 |
參數描述 |
|---|---|
| CP150 | 功能描述:測試探頭 150A DC/AC CUR PRB RoHS:否 制造商:Teledyne LeCroy 設備類型:Passive Probes 帶寬:500 MHz 尖端類型: 長度:1.3 mm 顏色:Black 電壓額定值: 電流額定值: |
| CP1500 | 制造商:PANJIT 制造商全稱:Pan Jit International Inc. 功能描述:HIGH CURRENT SILICON BRIDGE RECTIFIERS(VOLTAGE - 50 to 800 Volts CURRENT - 15 to 35 Amperes) |
| CP1500AVRLCD | 制造商:Cyberpower Systems 功能描述:CyberPower Intelligent LCD Series UPS CP1500AVRLCD 制造商:CYBER POWER SYSTEMS 功能描述:1500 VA BATTERY BACKUP LCD PANEL DISPLAY |
發布緊急采購，3分鐘左右您將得到回復。