
Flat panel sensor
C9732DK
ACTIVE AREA 118.4
A
1
14.5
1
2
9
1
1
2
7
9
8.1
73
266
Top cover material including window is carbon fiber (1.0 mm thickness).
Weight: 1.2 kg
* ±0.5
1
166 *
47.5 *
4
3
1
261 *
C1.3
(6
×
) M3 DEPTH 4
(0, 0)
(2367, 2339)
P
S
T
F
I
G
U
CMOS FLAT PANEL SENSOR
C9732DK
3
I
Dimensional outline (unit: mm, tolerance: ±1 mm unless otherwise noted)
KACCA0177EB
Table 1: Pin assignment and cable color for 9-pin power receptacle
Pin No.
1
2
3
4
5
6
7
8
9
9-pin receptacle: DE-9PF-N made by JAE (Japan Aviation Electronics Industry, Limited)
Mating plug: JST J-C9-2C made by JST Mfg. Co., Ltd.
Color
Yellow
Blue
Gray
Black
Red
Green
Purple
White
Brown
Signal
Digital GND
Digital GND
Analog GND
Analog GND
Analog GND
Digital +5 V
Digital +5 V
Analog +5 V
Analog +5 V
Table 2: Pin assignment and color cable for 4-pin trigger cable
Pin No.
1
2
3
4
4-pin receptacle: ECG. 0B. 304. CLL made by LEMO S. A.
Mating plug: FGG. 0B. 304. CLAD56 made by LEMO S. A.
Color
Signal
TrgIn
Digital GND
TrgOut
Digital GND
Blue
Orange
Green
Brown
Twist pair
Twist pair
I
System requirements
To operate C9732DK at full performance, the following system and peripherals are required.
· PC: Intel Pentium
IV
3 GHz (or CPU comparable) or higher recommended with USB2.0 on mother board and 1 GB memory.
· OS: Windows XP
· Power source: A. vdd = +5.0 ± 0.1 V (1100 mA), D. vdd = +5.0 ± 0.1 V (300 mA)
Please use a series power supply is recommended. (Avoid using a switching power supply.) A optional power source (PS4M-
L) is provided for AC100, 115, 230 V input voltages. A power cable (terminated with a JSTJ-C9-2C plug at one end and open
at the other end; 2 m; see Table 1.) and an external trigger cable (terminated with an FGG.OB.304.CLAD56 plug at one end and
open at the other end; 5 m; see table 2.) comes supplied with C9732DK. C9732DK does not include USB cable.
The voltages described above are specified at the flat panel sensor side. The impedance of the power cable attached with the
flat panel sensor is low enough but it causes 0.1 V approx. drop. Therefore the voltage at the power source side should be set
0.1 V higher than the voltage specified above. Install a noise filter on the AC power input line to prevent surges on the AC line.
DCAM-API (Digital Camera Application Programming Interface) produced by Hamamatsu supports C9732DK. The driver
software, DLL and sample software are included in DCAM-API. The latest version of DCAM-API can be downloaded from http:/
/www.dcamapi.com/. The USB receptacle is mini-B type. The mini-B USB cable is not attached. The earth terminal must be
connected to a stable earth point to eliminate noise from surroundings.