
NMOS multichannel detector head
C8892
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesv
gen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. 2002 Hamamatsu Photonics K.K.
Video data rate is 1/6 of master clock
frequency (62.5 kHz Max.).
The operation of circuit stroke length below
4.5 mm is recommended.
The relation between data video output
voltage and output charges from NMOS
image sensor can be expressed by the
following formula.
Note) Amplifier saturation voltage is 10 V.
Vout (V) = 3
×
Output charge
10
×
10
-12
[F]
I
Dimensional outline (unit: mm)
Terminal No.
1
2
3
4
5
Terminal name
NC
Data video
+15 V
-15 V
NC
Description
No connection
Analog video signal output; positive polarity
Positive power supply (25 mA)
Negative power supply (15 mA)
No connection
Digital input signal for initializing the circuit; positive
logic. Interval of these pulses equals the integration
time of the sensor
Digital input signal for operating the circuit at the
rising edge
Digital output signal indicating end of scan,
negative logic
Analog ground
Analog ground
Case shield
Digital ground
Digital ground
Digital ground
Digital output signal for A/D conversion; positive
logic
6
Start
7
CLK
8
EOS
9
A. GND
A. GND
Shield
D. GND
D. GND
D. GND
10
11
12
13
14
15
Trigger
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
KACCA0113EA
KACCC0069EA
I
Pin assignment of "Signal I/O" connector (15-pin D-sub socket type)
Cat. No. KACC1073E01
Apr. 2002 DN
4
(
)
78PCD
(4
×
) 3.3
NMOS LINEAR IMAGE SENSOR
(OPTIONAL)
PC-BOARD
FLANGE
33.0
45
2.0
FOCAL ADJUSTER DIAL
SIGNAL
CONNECTOR
HOUSING CASE
(INCLUDING FLANGE)
OFFSET
ADJUSTER
TRIMMER
WEIGHT: approx. 0.16 kg
FRONT VIEW
SIDE VIEW
REAR VIEW
The focal position can be adjusted backward
within the range from 0 to 4.5 mm (circuit
stroke length) with a focal adjustment dial.
8