- 您現在的位置：買賣IC網 > PDF目錄369586 > BXM80533B933128 Microprocessor PDF資料下載
參數資料
| 型號： | BXM80533B933128 |
| 英文描述： | Microprocessor |
| 中文描述： | 微處理器 |
| 文件頁數： | 68/81頁 |
| 文件大小： | 598K |
| 代理商： | BXM80533B933128 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁當前第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁
Mobile Intel
Celeron Processor (0.18μ) in BGA2 and Micro-PGA2 Packages
Datasheet
Order Number#249563-001
68
appropriate pins/balls on both agents on the system bus if they are used. During power-on
configuration, DEP[7:0]# signals can be enabled for ECC checking or disabled for no checking.
DRDY# (I/O - GTL+)
The DRDY# (Data Ready) signal is asserted by the data driver on each data transfer, indicating
valid data on the data bus. In a multi-cycle data transfer, DRDY# can be deasserted to insert idle
clocks. This signal must be connected to the appropriate pins/balls on both agents on the system
bus.
EDGCTRLP (Analog)
The EDGCTRLP (Edge Rate Control) signal is used to configure the edge rate of the GTL+ output
buffers. Connect the signal to V
SS
with a 110-
, 1% resistor.
FERR# (O - 1.5V Tolerant Open-drain)
The FERR# (Floating-point Error) signal is asserted when the processor detects an unmasked
floating-point error. FERR# is similar to the ERROR# signal on the Intel 387 coprocessor, and it
is included for compatibility with systems using DOS-type floating-point error reporting.
FLUSH# (I - 1.5V Tolerant)
When the FLUSH# (Flush) input signal is asserted, the processor writes back all internal cache
lines in the Modified state and invalidates all internal cache lines. At the completion of a flush
operation, the processor issues a Flush Acknowledge transaction. The processor stops caching any
new data while the FLUSH# signal remains asserted.
On the active-to-inactive transition of RESET#, each processor bus agent samples FLUSH# to
determine its power-on configuration.
HIT# (I/O - GTL+), HITM# (I/O - GTL+)
The HIT# (Snoop Hit) and HITM# (Hit Modified) signals convey transaction snoop operation
results, and must be connected to the appropriate pins/balls on both agents on the system bus.
Either bus agent can assert both HIT# and HITM# together to indicate that it requires a snoop
stall, which can be continued by reasserting HIT# and HITM# together.
IERR# (O - 1.5V Tolerant Open-drain)
The IERR# (Internal Error) signal is asserted by the processor as the result of an internal error.
Assertion of IERR# is usually accompanied by a SHUTDOWN transaction on the system bus.
This transaction may optionally be converted to an external error signal (e.g., NMI) by system
logic. The processor will keep IERR# asserted until it is handled in software or with the assertion
of RESET#, BINIT, or INIT#.
相關PDF資料 |
PDF描述 |
|---|---|
| KC80524NY450128 | Microprocessor |
| KP80524NY450128 | Microprocessor |
| RH8053GC017512 | Microprocessor |
| RH8053GC021512 | Microprocessor |
| RH8053GC025512 | Microprocessor |
相關代理商/技術參數 |
參數描述 |
|---|---|
| BXM80536NC1400ES L7LS | 制造商:Intel 功能描述:CELERON M,360,1.40GHZ,1M CACHE, 400MHZ FSB,1.26V,UFCPGA - Boxed Product (Development Kits) |
| BXMP1000 | 制造商:SPECTRUM 制造商全稱:Spectrum Microwave, Inc. 功能描述:RF AMPLIFIER |
| BXMP1001 | 制造商:SPECTRUM 制造商全稱:Spectrum Microwave, Inc. 功能描述:RF AMPLIFIER |
| BXMP1002 | 制造商:SPECTRUM 制造商全稱:Spectrum Microwave, Inc. 功能描述:RF AMPLIFIER |
| BXMP1003 | 制造商:SPECTRUM 制造商全稱:Spectrum Microwave, Inc. 功能描述:RF AMPLIFIER |
發(fā)布緊急采購，3分鐘左右您將得到回復。