DC/DC CONVERTERS 264W Wide Input DC/DC Converters
1
2 YEAR WARRANTY
BXF400 Series
S i n g l e o u t p u t
Industry standard footprint
Adjustable output voltage with output currents of 80A
No minimum load required
2:1 input range for battery powered applications
Undervoltage lockout (UVLO)
Overvoltage and overcurrent protection
Synchronisable and parallelable with load sharing
Overtemperature and short circuit protection
Current monitor and power good signal
Remote ON/OFF
Available RoHS compliant
BXF400 Series high power density DC/DC converters can provide up to 80A output
current and have an industry-standard footprint, measuring just 2.40 x 4.60 x 0.52 inches.
These converters have the highest output current rating of any comparably-sized
products on the market, are equally suitable for new designs or as replacement power
sources in existing equipment. BXF400 Series converters are designed specifically for
redundant and distributed power systems in the computer and telecommunications
sectors, but their feature-rich specifications make them suitable for a very wide range of
applications. Using Bellcore 332, the MTBF is over 1,000,000 hours. Aluminium baseplate
technology and four threaded M3 inserts make heatsink attachment and thermal
management easy. The BXF400 Series is approved by UL, CSA and VDE.
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
EMC CHARACTERISTICS
Conducted emissions
(See Note 7)
Bellcore 332
FCC part 15
EN55022, CISPR22
Level A
Level A
Level A
GENERAL SPECIFICATIONS
Efficiency
See table
Isolation voltage
Input/case
Input/output
Output/case
1500VDC
1500VDC
1500VDC
Switching frequency
Fixed
850kHz typ.
Approvals and
standards (See Note 4)
VDE0805, EN60950, IEC950
UL1950, CSA C22.2 No. 950
Case material
Aluminium baseplate
and plastic casing
Material flammability
UL94V-0
Weight
200g (7.06oz)
MTBF
Bellcore 332
MIL-HDBK-217F
@ 40°C, 100% FL
>1,000,000 hours
>200,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
Operating case temp. -40°C to +100°C
Non-operating
-55°C to +125°C
Altitude
Operating
Non-operating
10,000 feet max.
40,000 feet max.
Vibration
5Hz to 500Hz
2.4G rms (approx.)
OUTPUT SPECIFICATIONS
Voltage adjustability
Model specific
Set point accuracy
±0.5% typ., ±1.6% max.
Line regulation
Low line to high line
±0.10% typ.
Load regulation
Full load to min. load
±0.15% typ.
Minimum load
0%
Overshoot
0V
Undershoot
At turn-on and turn-off
0V
Ripple and noise
5Hz to 20MHz (See Note 1)
20mV
Temperature coefficient
±0.01%/°C
Transient response
Recovery time (See Note 2)
Peak deviation
500μs
500mV
Remote sense
0.5VDC transmission
line drop compensation
INPUT SPECIFICATIONS
Input voltage range
48Vin nominal
36 to 75VDC
Input current
No load
Remote OFF
100mA max.
20mA max.
Input current (max.)
(See Note 3)
12A max.
Input reflected ripple
(See Note 5)
35mA pk-pk
Active low remote ON/OFF
Logic compatibility
ON
OFF
1.2VDC max.
Open circuit
Undervoltage lockout
48Vin: power up
48Vin: power down
34.8V
33.1V
Start-up time
(See Note 6)
Power up
Remote ON/OFF
15ms
13ms
SPECIFICATIONS
File Name: bxf400.pdf Rev: 30 Mar 2006