
ZETTLER
 electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US   www.zettlerrelay.com  sales@zettlerrelay.com
Telephone +44 (0) 1582 599 600  Fax +44 (0) 1582 599 700
2000--11-17
AZ832
CONT ACT S
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Ratings
Resistive load:
Max. switched power: 150 W or 250 VA
Max. switched current: 5 A
Max. switched voltage: 250 VDC or 250 VAC
*Note: If switching voltage is greater than 30 VDC, 
special precautions must be taken. Please contact 
the factory.
Rated Load
UL/CSA
2 A at
1 A at 120 VAC resistive
25 VDC resistive
Material
Gold plated silver against palladium silver. 
Gold plated palladium silver against palladium 
silver (Suffix “A”)
Resistance
< 50 milliohms initially
POLARIZED DIP RELAY
SINGLE SIDE STABLE
FEATURES
 Low profile for compact board spacing
 DC coils to 48 VDC
 High sensitivity, 96 mW pickup
 Life expectancy to 20 million operations
 High switching capacity, 150 W, 250 VA
 Fits standard 16 pin IC socket
 Epoxy sealed for automatic wave soldering 
and cleaning
 Meets FCC Part 68.302 1500 V lightning surge
 Meets FCC Part 68.304 1000 V dielectric
 UL file E43203; CSA file LR702225
GENERAL DAT A
Life Expectancy
Minimum operations
2 x 10
7
1 x 10
5
at 2 A, 30 VDC or 1 A, 125 VAC
2 x 10
6
at 1 A, 30 VDC or .5 A, 125 VAC
Mechanical
Electrical
Operate Time (typical)
3 ms at nominal coil voltage
Release Time (typical)
2 ms at nominal coil voltage
(with no coil suppression)
Bounce (typical)
3 ms 
Dielectric Strength
(at sea level)
1500 Vrms contact to coil
1000 Vrms between contact sets
1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
Insulation Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 115°C (239°F)
Vibration
50 g at 10–500 Hz
Shock
50 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
5 grams
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature
Standard coil: 128 mW
Sensitive coil: 96 mW
0.9 W at 20°C (68°F)
Max. 115°C (239°F)
NOT ES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
5. Relay adjustment may be affected if undue pressure is exerted 
on relay case.
6. Specifications subject to change without notice.