參數資料
型號： ATTINY15L-1SU
廠商： Atmel
文件頁數： 11/85頁
文件大?。?/td> 0K
描述： IC MCU AVR 1K FLASH 1.6MHZ 8SOIC
標準包裝： 95
系列： AVR® ATtiny
核心處理器： AVR
芯體尺寸： 8-位
速度： 1.6MHz
外圍設備： 欠壓檢測/復位，POR，PWM，WDT
輸入/輸出數： 6
程序存儲器容量： 1KB（512 x 16）
程序存儲器類型： 閃存
EEPROM 大?。?/td> 64 x 8
電壓 - 電源 (Vcc/Vdd)： 2.7 V ~ 5.5 V
數據轉換器： A/D 4x10b
振蕩器型： 內部
工作溫度： -40°C ~ 85°C
封裝/外殼： 8-SOIC（0.209"，5.30mm 寬）
包裝： 管件
19
ATtiny15L
1187H–AVR–09/07
Interrupt Handling
The ATtiny15L has two 8-bit Interrupt Mask Control Registers: GIMSK (General Inter-
rupt Mask Register) and TIMSK (Timer/Counter Interrupt Mask Register).
When an interrupt occurs, the Global Interrupt Enable I-bit is cleared (zero) and all inter-
rupts are disabled. The user software can set the I-bit (one) to enable interrupts. The I-
bit is set (one) when a Return from Interrupt instruction (RETI) is executed.
When the Program Counter is vectored to the actual Interrupt Vector in order to execute
the interrupt handling routine, hardware clears the corresponding flag that generated the
interrupt. Some of the interrupt flags can also be cleared by writing a logical “1” to the
flag bit position(s) to be cleared.
If an interrupt condition occurs when the corresponding interrupt enable bit is cleared
(zero), the interrupt flag will be set and remembered until the interrupt is enabled, or the
flag is cleared by software.
If one or more interrupt conditions occur when the global interrupt enable bit is cleared
(zero), the corresponding interrupt flag(s) will be set and remembered until the global
interrupt enable bit is set (one), and will be executed by order of priority.
Note that external level interrupt does not have a flag, and will only be remembered for
as long as the interrupt condition is present.
Note that the Status Register is not automatically stored when entering an interrupt rou-
tine and restored when returning from an interrupt routine. This must be handled by
software.
Interrupt Response Time
The interrupt execution response for all the enabled AVR interrupts is four clock cycles
minimum. After the four clock cycles the Program Vector address for the actual interrupt
handling routine is executed. During this 4-clock-cycle period, the Program Counter
(nine bits) is pushed onto the Stack. The vector is often a relative jump to the interrupt
routine, and this jump takes two clock cycles. If an interrupt occurs during execution of a
multi-cycle instruction, this instruction is completed before the interrupt is served. If an
interrupt occurs when the MCU is in sleep mode, the interrupt execution response time
is increased by four clock cycles.
A return from an interrupt handling routine takes four clock cycles. During these four
clock cycles, the Program Counter (nine bits) is popped back from the Stack. When
AVR exits from an interrupt, it will always return to the main program and execute one
more instruction before any pending interrupt is served.
The General Interrupt Mask
Register – GIMSK
Bit 7 – Res: Reserved Bit
This bit is a reserved bit in the ATtiny15L and always reads as zero.
Bit 6 – INT0: External Interrupt Request 0 Enable
When the INT0 bit is set (one) and the I-bit in the Status Register (SREG) is set (one),
the external pin interrupt is activated. The Interrupt Sense Control0 bits 1/0 (ISC01 and
ISC00) in the MCU general Control Register (MCUCR) define whether the external
interrupt is activated on rising or falling edge, on pin change, or low level of the INT0 pin.
Activity on the pin will cause an interrupt request even if INT0 is configured as an output.
Bit
7
65
43
2
1
0
$3B
–
INT0
PCIE
–
GIMSK
Read/Write
R
R/W
R
Initial Value
0
相關PDF資料
PDF描述
ATTINY2313-20SUR IC MCU AVR 2K FLASH 20SOIC
ATTINY2313A-MMHR IC MCU AVR 2K FLASH 3X3 20QFN
ATTINY26-16MQR IC MCU AVR 2K 16MHZ IND 32QFN
ATTINY26L-8PU IC MCU AVR 2K 5V 8MHZ 20-DIP
ATTINY28V-1AUR IC MCU AVR 2K 1.2MHZ 1.8V 32TQFP
相關代理商/技術參數
參數描述
ATTINY15L-1SU SL383 制造商:Atmel Corporation 功能描述:AVR, 1K FLASH, 64B EE, ADC, 8
ATTINY15POD 功能描述:仿真器/模擬器 AVR ICE10 POD REPLACEMENT RoHS:否 制造商:Blackhawk 產品:System Trace Emulators 工具用于評估:C6000, C5000, C2000, OMAP, DAVINCI, SITARA, TMS470, TMS570, ARM 7/9, ARM Cortex A8/R4/M3 用于:XDS560v2
ATTINY1614-SSFR 功能描述:IC MCU 8BIT 16KB FLASH 14SOIC 制造商:microchip technology 系列:tinyAVR? 1 包裝:剪切帶（CT） 零件狀態:在售 核心處理器:AVR 核心尺寸:8-位 速度:20MHz 連接性:I2C，IrDA，LIN，SPI，UART/USART 外設:欠壓檢測/復位，POR，PWM，WDT I/O 數:12 程序存儲容量:16KB（16K x 8） 程序存儲器類型:閃存 EEPROM 容量:256 x 8 RAM 容量:2K x 8 電壓 - 電源（Vcc/Vdd）:1.8 V ~ 5.5 V 數據轉換器:A/D 14x10b，D/A 3x8b 振蕩器類型:內部 工作溫度:-40°C ~ 125°C（TA） 封裝/外殼:14-SOIC（0.154"，3.90mm 寬） 供應商器件封裝:14-SOIC 標準包裝:1
ATTINY1614-SSNR 功能描述:IC MCU 8BIT 16KB FLASH 14SOIC 制造商:microchip technology 系列:tinyAVR? 1 包裝:剪切帶（CT） 零件狀態:在售 核心處理器:AVR 核心尺寸:8-位 速度:20MHz 連接性:I2C，IrDA，LIN，SPI，UART/USART 外設:欠壓檢測/復位，POR，PWM，WDT I/O 數:12 程序存儲容量:16KB（16K x 8） 程序存儲器類型:閃存 EEPROM 容量:256 x 8 RAM 容量:2K x 8 電壓 - 電源（Vcc/Vdd）:1.8 V ~ 5.5 V 數據轉換器:A/D 14x10b，D/A 3x8b 振蕩器類型:內部 工作溫度:-40°C ~ 105°C（TA） 封裝/外殼:14-SOIC（0.154"，3.90mm 寬） 供應商器件封裝:14-SOIC 標準包裝:1
ATTINY1616-MFR 功能描述:IC MCU 8BIT 16KB FLASH 20QFN 制造商:microchip technology 系列:tinyAVR? 1 包裝:剪切帶（CT） 零件狀態:在售 核心處理器:AVR 核心尺寸:8-位 速度:20MHz 連接性:I2C，IrDA，LIN，SPI，UART/USART 外設:欠壓檢測/復位，POR，PWM，WDT I/O 數:18 程序存儲容量:16KB（16K x 8） 程序存儲器類型:閃存 EEPROM 容量:256 x 8 RAM 容量:2K x 8 電壓 - 電源（Vcc/Vdd）:1.8 V ~ 5.5 V 數據轉換器:A/D 20x10b，D/A 3x8b 振蕩器類型:內部 工作溫度:-40°C ~ 125°C（TA） 封裝/外殼:20-VFQFN 裸露焊盤 供應商器件封裝:20-VQFN（3x3） 標準包裝:1
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*