- 您現在的位置：買賣IC網 > PDF目錄381540 > ATR0808 (Atmel Corp.) Three Channel Laser Driver with RF Oscillator and Two Outputs PDF資料下載
參數資料
| 型號： | ATR0808 |
| 廠商： | Atmel Corp. |
| 英文描述： | Three Channel Laser Driver with RF Oscillator and Two Outputs |
| 中文描述： | 三通道激光驅動器與RF振蕩器和兩個輸出 |
| 文件頁數： | 1/8頁 |
| 文件大?。?/td> | 218K |
| 代理商： | ATR0808 |
Rev. 4724ES–DVD–01/04
Features
Current-controlled Output Current Source with 3 Input Channels
Two Selectable Outputs for Grounded Laser Diodes
Output Current per Write Channel: 350 mA
Total Output Current: 500 mA
200
Channel Input Resistance
On-chip RF Oscillator
Control of Two Different Swings by Use of Two External Resistors
Oscillator Frequency Range from 200 MHz to 500 MHz
Oscillator Swing: 100 mA
Single 5 V Power Supply
Common Enable/Disable Input
TTL/CMOS Control Signals
Small Pb-free QFN16 (4 mm
×
4 mm) or SSO16 Package
Applications
DVD-ROM with CD-RW Capability
DVD+RW with CD-RW Capability
DVD-RW with CD-RW Capability
Writable Optical Drives
Description
The ATR0808 is a laser diode driver for the operation of two different grounded laser
diodes for DVD-RW/DVD+RW (650 nm) and CD-RW (780 nm). It includes three chan-
nels for three different optical power levels which are controlled by a separate IC. The
read channel generates a continuous output level, whereas the channels 2 and 3 are
provided as write channels with very fast switching speeds. Write current pulses are
enabled when a low signal is applied to the NE pins. All channels are summed
together and switched to one of the two IOUTA or IOUTB outputs by the select input
SELA. Each write channel (channel 2 and 3) can contribute up to 350 mA to the total
output current, up to 500 mA. The read channel can contribute up to 150 mA. Total
gains of 100 (read channel), 250 (channel 2 and 3) are provided between each refer-
ence current input and the selected output. Although, the reference inputs are current
inputs, voltage control is possible by using external resistors. An on-chip RF oscillator
is provided to reduce laser mode hopping noise during read mode. Swing can be set
independently for the two selectable outputs with two different resistors. Oscillation is
enabled by a high signal at the ENOSC pin. Complete output current and oscillator
switch-off is achieved by a low signal at the ENABLE input.
Three Channel
Laser Driver
with RF
Oscillator and
Two Outputs
ATR0808
Summary
相關PDF資料 |
PDF描述 |
|---|---|
| ATR0808-PEQG | Three Channel Laser Driver with RF Oscillator and Two Outputs |
| ATR0808-TCQG | Three Channel Laser Driver with RF Oscillator and Two Outputs |
| ATR0809 | FOUR CHANNEL LASER DRIVER WITH RF OSCILLATOR AND TWO OUTPUTS |
| ATR0809-PRQG | FOUR CHANNEL LASER DRIVER WITH RF OSCILLATOR AND TWO OUTPUTS |
| ATR0809-TKQG | FOUR CHANNEL LASER DRIVER WITH RF OSCILLATOR AND TWO OUTPUTS |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ATR0808-PEQG | 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Three Channel Laser Driver with RF Oscillator and Two Outputs |
| ATR0808-TCQG | 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Three Channel Laser Driver with RF Oscillator and Two Outputs |
| ATR0809 | 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:FOUR CHANNEL LASER DRIVER WITH RF OSCILLATOR AND TWO OUTPUTS |
| ATR0809-PRQG | 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:FOUR CHANNEL LASER DRIVER WITH RF OSCILLATOR AND TWO OUTPUTS |
| ATR0809-PRQG80 | 功能描述:激光驅動器 COM.DVD-4CH. COMBI LASER DRIVER RoHS:否 制造商:Micrel 數據速率:4.25 Gbps 工作電源電壓:3 V to 3.6 V 電源電流:80 mA 最大工作溫度:+ 85 C 封裝 / 箱體:QFN-16 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。