
AT1601
Preliminary Product Information
USB High-Side Power Switches with Flag
Features
Built-In (Typical 110m
at 5.0V)
N-Channel MOSFET
Output can be Forced Higher Than Input
(Off-State)
Low Supply Current
100
μ
A Typical On-State Current
1
μ
A Typical Off-State Current
1A minimum Continuous Load Current
1.4A Typical Current Limit
Open-Drain Fault Flag Output
Hot Plug-In Application(Soft-Start)
1.8V to 5.5V Operating Range
1.7V Under-Voltage-Lockout(UVLO)
Thermal Shutdown Protection
SOP8 Package
2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C.
Tel: 886-3-563-0878 WWW:
http://www.aimtron.com.tw
Fax: 886-3-563-0879 Email:
service@aimtron.com.tw
1
Applications
High-Side Power Protection Switch
USB Power Management
Notebook, Motherboard PCs
General Description
The AT1601 is an integrated high-side power
switch optimized for self-powered and bus-
powered Universal Serial Bus (USB) applications.
With built-in a charge pump circuitry to drive the
internal MOSFET switch, the switch’s low on-
resistance meets USB voltage drop requirements.
A flag output is available to indicate fault
conditions to the local USB controller.
The AT1601 includes soft-start to limit inrush
current during plug-in, 1.4A current limit to limit
the output current to a safe level which meet the
UL 25VA safety requirements, thermal shutdown
to prevent catastrophic switch failure from high-
current loads, under voltage lockout (UVLO) to
ensure that the device remains off unless there is a
valid input voltage present, and an enable input
that is compatible with both 3.3V and 5V logic.
System Block
Aimtron reserves the right without notice to change this circuitry and specifications.