參數資料
型號： AMBE2000
廠商： Electronic Theatre Controls, Inc.
英文描述： VOCODER CHIP
中文描述： 聲碼器芯片
文件頁數： 43/47頁
文件大?。?/td> 324K
代理商： AMBE2000
AMBE-2000 Vocoder Chip
User’s Manual Version 3.0
page 43
Visit us at
www.dvsinc.com
Confidential Proprietary, Subject to Change
Word #
0
1
2
3
4
5
6
7
8
9
10
11
12-23
Value
0x13ec
0x07xx
0x1355
0x009f
0x0000
0x0000
0x0000
0x0000
0x0000
0x0000
0x0000
0x0000
Description
Header
Slip Control Packet ID, xx=CWD1 (See table 5-B) Typical value xx=00
Slip Control indicator for AMBE-2000
Slip Control data
Must be 0x0000
Must be 0x0000
Must be 0x0000
Must be 0x0000
Must be 0x0000
Must be 0x0000
Must be 0x0000
Must be 0x0000
Channel Data for AMBE voice decoder
Table 7D: Slip Control Packet
Method 1 - Internal Slip Control
This is the simplest method of slip control and is the default method provided slip control is enabled (SLIP_EN is high) on the
chip. In this method the vocoder chip’s internal slip adjustment of 160 to 161 sample per frame is used. In order to work
properly, the system designer must set-up the sample rate and packet timing so that the following constraint is met:
160 < Average-Frame-Interval * (1 +/- Frame-Drift) * Sample-Rate * (1 +/- Sample-Drift) < 161
For example using an Average-Frame-Interval = 20 ms, and assuming 100 parts per million oscillator accuracy (i.e Frame-Drift
= Sample-Drift = .0001), then the above constraint requires:
8002 Hz < Sample-Rate < 8048 Hz.
In practice Sample-Rate=8002 Hz would be preferred since it is closer to the nominal value of 8000 Hz.
In another example the Sample-Rate = 8000 Hz. as provided by a PCM source. Again assuming 100 parts per million
oscillator accuracy for both clocks (i.e. Frame-Drift = Sample-Drift = .0001), then the above constraint requires:
20.0041 ms. < Average-Frame–Interval < 20.1209 ms.
This can be achieved by slightly decreasing the channel bit rate or adding an extra bit into the channel bit stream every several
voice frames.
Method 2 - Extended Slip Control with Periodic Slip Control Packets
The AMBE-2000 can provide extended slip compensation through the insertion of Slip Control Packets. One method of using
this capability is for the system to periodically insert these Slip Control Packets into the data stream sent to the AMBE-2000.
Note that for this method slip control must be enabled (SLIP_EN is high) on the chip. This approach gives the designer a way
to accommodate clock drift while providing very flexible frame-interval and sample-rate timing. Furthermore minimal system
overhead is required. In this method a Slip Control Packet is generated by the system by setting the Control Words as shown in
Table 7D above, where the Channel Data is the compressed voice data being sent to the AMBE decoder. In the Periodic Slip
Control method such a Slip Control Packet is input into the vocoder chip every N frames. The value of N must be selected by
the design engineer to meet the following constraint:
相關PDF資料
PDF描述
AMC0802A CONTOUR DRAWING & BLOCK DIAGRAM
AMC317 1.5A / 3- TERMINAL ADJUSTABLE REGULATOR
AMC317T 1.5A / 3- TERMINAL ADJUSTABLE REGULATOR
AMC317ST 1.5A / 3- TERMINAL ADJUSTABLE REGULATOR
AMC5902 6CH Motor Driver for CD-ROM, DVD-ROM
相關代理商/技術參數
參數描述
AMB-EHS160 制造商:Schroff/Pentair Electronic Packaging 功能描述:
AMBF22 制造商:ABRACON 制造商全稱:Abracon Corporation 功能描述:MULTILAYER CHIP BALANCE-EMI FILTER
AMBI LIGHT SENSOR 制造商:LIQUIDWARE 功能描述:Ambient Light Sensor
AMB-KIT1 功能描述:TEST LEAD SET FOR INSUL RESIST 制造商:amprobe 系列:AMB 包裝:袋 零件狀態:有效 套件類型:測試引線 內容:短頭鱷魚夾，測試引線，測試探針 標準包裝:1
AMB-KIT2 制造商:Amprobe Test Tools 功能描述:10 KV SHIELDED LEAD WITH TIP FOR AMB-110 AMB-110
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*