參數資料
型號: AM1
元件分類: 放大器
英文描述: 60 MHz - 3000 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER
封裝: TO-243C, SOT-89, 3 PIN
文件頁數: 6/6頁
文件大小: 286K
代理商: AM1
Specifications and information are subject to change without notice.
WJ Communications, Inc
Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com Web site: www.wj.com
Page 6 of 6
July 2006
AM1
High Dynamic Range Gain Block
Product Information
The Communications Edge
TM
AM1-G (Green / Lead-free SOT-89 Package) Mechanical Information
This package is lead-free/Green/RoHS-compliant. It is compatible with both lead-free (maximum 260
°C reflow temperature) and leaded
(maximum 245
°C reflow temperature) soldering processes. The plating material on the leads is NiPdAu.
Outline Drawing
Land Pattern
Thermal Specifications
Parameter
Rating
Operating Case Temperature
-40 to +85
°C
Thermal Resistance, Rth
(1)
88
°C/W
Junction Temperature, Tj
(2)
116
°C
1. The thermal resistance is referenced from the hottest
part of the junction to the ground tab (pin 4).
2. This corresponds to the typical biasing condition of
+5V, 78 mA at an 85
°C case temperature.
A
minimum MTTF of 1 million hours is achieved for
junction temperatures below 160
°C.
Product Marking
The AM1-G will be marked with an “A1G”
designator.
An alphanumeric lot code
(“XXXX-X”) is also marked below the part
designator on the top surface of the package.
The obsolete tin-lead package is marked with
an
“A1”
designator
followed
by
an
alphanumeric lot code.
Tape and reel specifications for this part are
located on the website in the “Application
Notes” section.
MSL / ESD Rating
ESD Rating: Class 1B
Value:
Passes
500V to <1000V
Test:
Human Body Model (HBM)
Standard:
JEDEC Standard JESD22-A114
ESD Rating: Class IV
Value:
Passes
1000V to <2000V
Test:
Charged Device Model (CDM)
Standard:
JEDEC Standard JESD22-C101
MSL Rating: Level 3 at +260
°C convection reflow
Standard:
JEDEC Standard J-STD-020
Mounting Config. Notes
1. Ground / thermal vias are critical for the proper
performance of this device. Vias should use a .35mm
(#80 / .0135”) diameter drill and have a final plated
thru diameter of .25 mm (.010”).
2. Add as much copper as possible to inner and outer
layers near the part to ensure optimal thermal
performance.
3. Mounting screws can be added near the part to fasten
the board to a heatsink.
Ensure that the ground /
thermal via region contacts the heatsink.
4. Do not put solder mask on the backside of the PC board
in the region where the board contacts the heatsink.
5. RF trace width depends upon the PC board material
and construction.
6. Use 1 oz. Copper minimum.
7. All dimensions are in millimeters (inches). Angles are
in degrees.
MTTF vs. GND Tab Temperature
10
100
1000
10000
60
70
80
90
100
110
Tab Temperature (°C)
相關PDF資料
PDF描述
AM42-0002 14000 MHz - 14500 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER
AM42-0007 14000 MHz - 14500 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER
AM42-0040 5900 MHz - 6400 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER
AM42-0055 2200 MHz - 2400 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER
AM50-0001RTR 815 MHz - 915 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER
相關代理商/技術參數
參數描述
AM-1.5MM 制造商:COOPER INDUSTRIES 功能描述:BIT 1/4 HEX DRV POWER # 1.5MM
AM1/4 制造商:AIMCO 功能描述:RING MAGNETIC FOR 1/4" SHANK 制造商:AIMCO 功能描述:MAGNETIC RING 制造商:AIMCO 功能描述:RING MAGNETIC FOR 1/4" SHANK BIT 制造商:AIMCO 功能描述:MAGNETIC RING; Magnet Type:Ring; External Diameter:19mm; For Use With:1/4" Shank Bit; Leaded Process Compatible:No; Peak Reflow Compatible (260 C):No; Size:7mm I.D., 19mm O.D. ;RoHS Compliant: No
AM1/4L-0303SH30-NZ 制造商:AIMTEC 制造商全稱:AIMTEC 功能描述:1/4 Watt | DC-DC Converter
AM1/4L-0303S-NZ 制造商:Aimtec 功能描述:DC/DC CONVERTER 1/4 WATT - Rail/Tube 制造商:Aimtec 功能描述:AM1/4L-0303S-NZ \ DC/DC CONVERTER 1/4 WATT \ 15 制造商:Aimtec 功能描述:AM1/4L-0303S-NZ \\ DC/DC CONVERTER 1/4 WATT \\ 15
AM1/4L-0303S-NZTR 制造商:Aimtec 功能描述:DC/DC CONVERTER 1/4 WATT - Tape and Reel 制造商:Aimtec 功能描述:AM1/4L-0303S-NZTR \ DC/DC CONVERTER 1/4 WATT \ 500