- 您現在的位置：買賣IC網 > PDF目錄18784 > ADW54011Z-0REEL7 (Analog Devices Inc)IC MUX 4:1 WIDEBAND 20TSSOP PDF資料下載
參數資料
| 型號： | ADW54011Z-0REEL7 |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 15/17頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC MUX 4:1 WIDEBAND 20TSSOP |
| 標準包裝： | 1,000 |
| RF 型： | 通用 |
| 頻率： | 0Hz ~ 2GHz |
| 特點： | SP4T |
| 封裝/外殼： | 20-TSSOP（0.173"，4.40mm 寬） |
| 供應商設備封裝： | 20-TSSOP |
| 包裝： | 帶卷 (TR) |
ADG904/ADG904-R
Data Sheet
Rev. C | Page 6 of 16
TERMINOLOGY
Table 5.
Parameter
Description
VDD
Most Positive Power Supply Potential.
IDD
Positive Supply Current.
GND
Ground (0 V) Reference.
Ax
Logic Control Input.
VINL
Maximum Input Voltage for Logic 0.
VINH
Minimum Input Voltage for Logic 1.
IINL (IINH)
Input Current of the Digital Input.
CIN
Digital Input Capacitance.
tON (
EN)
Delay between Applying the EN Control Input and the Output Switching On.
tOFF (
EN)
Delay between Applying the EN Control Input and the Output Switching Off.
tRISE
Rise Time. Time for the RF signal to rise from 10% of the on level to 90% of the on level.
tFALL
Fall Time. Time for the RF signal to fall from 90% of the on level to 10% of the on level.
tTRANS
Transition Time. Delay between applying the digital control input and the output switching on.
Off Isolation
The Attenuation between Input and Output Ports of the Switch when the Switch Control Voltage is in the Off Condition.
Insertion Loss
The Attenuation between Input and Output Ports of the Switch when the Switch Control Voltage is in the On Condition.
Crosstalk
Measure of Unwanted Signal Coupled through from One Channel to Another as a Result of Parasitic Capacitance.
P–1 dB
1 dB Compression Point. The RF input power level at which the switch insertion loss increases by 1 dB over its low level
value. P–1 dB is a measure of how much power the on switch can handle before the insertion loss increases by 1 dB.
IP3
Third-Order Intermodulation Intercept. This is a measure of the power in false tones that occur when closely spaced
tones are passed through a switch, and the nonlinearity of the switch causes these false tones to be generated.
Return Loss
The Amount of Reflected Power Relative to the Incident Power at a Port. Large return loss indicates good matching. By
measuring return loss, the voltage standing wave ratio (VSWR) can be calculated from conversion charts. VSWR indicates
the degree of matching present at a switch RF port.
Video
Feedthrough
Spurious Signals Present at the RF Ports of the Switch when the Control Voltage Is Switched from High to Low or Low to
High without an RF Signal Present.
相關PDF資料 |
PDF描述 |
|---|---|
| IXTP88N085T | MOSFET N-CH 85V 88A TO-220 |
| UPG2150T5L-A | IC SWITCH SP3T 12-TSQFN |
| UPG2031TQ-E1-A | IC SWITCH SP3T 10-TSON |
| UPG2183T6C-E2-A | IC SW SP4T 50MHZ-2.5GHZ 16-QFN |
| UPG2150T5L-E2-A | IC SWITCH SP3T 12-TSQFN |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADW54012Z-0REEL7 | 功能描述:IC CROSSPOINT SWITCH 8X8 32LFCSP RoHS:是 類別:集成電路 (IC) >> 接口 - 模擬開關，多路復用器，多路分解器 系列:- 其它有關文件:STG4159 View All Specifications 標準包裝:5,000 系列:- 功能:開關 電路:1 x SPDT 導通狀態電阻:300 毫歐 電壓電源:雙電源 電壓 - 電源，單路/雙路(±):±1.65 V ~ 4.8 V 電流 - 電源:50nA 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:7-WFBGA，F(xiàn)CBGA 供應商設備封裝:7-覆晶 包裝:帶卷 (TR) |
| ADW54013Z-0REEL7 | 制造商:Analog Devices 功能描述: |
| ADW58001Z-0 | 制造商:Analog Devices 功能描述: |
| ADW58001Z-0-REEL | 制造商:Analog Devices 功能描述: |
| ADW60008ARMZ-RL | 制造商:Analog Devices 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。