- 您現在的位置：買賣IC網 > PDF目錄374020 > ADP3301AR-5 (ANALOG DEVICES INC) High Accuracy anyCAP⑩ 100 mA Low Dropout Linear Regulator PDF資料下載
參數資料
| 型號： | ADP3301AR-5 |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | 基準電壓源/電流源 |
| 英文描述： | High Accuracy anyCAP⑩ 100 mA Low Dropout Linear Regulator |
| 中文描述： | 5 V FIXED POSITIVE LDO REGULATOR, 0.2 V DROPOUT, PDSO8 |
| 封裝： | SOP-8 |
| 文件頁數： | 6/8頁 |
| 文件大?。?/td> | 125K |
| 代理商： | ADP3301AR-5 |
ADP3301
–6–
REV. 0
APPLICAT ION INFORMAT ION
anyCAP *
T he ADP3301 is very easy to use. T he only external component
required for stability is a small 0.47
μ
F bypass capacitor on the
output. Unlike the conventional LDO designs, the ADP3301 is
stable with virtually any type of capacitors (anyCAP *) indepen-
dent of the capacitor’s ESR (Effective Series Resistance) value.
In a typical application, if the shutdown feature is not used, the
shutdown pin (Pin 5) should be tied to the input pin. Pins 7
and 8 must be tied together, as well as Pins 1 and 2, for proper
operation.
Capacitor Selection
Output Capacitors: as with any micropower device, output
transient response is a function of the output capacitance. T he
ADP3301 is stable with a wide range of capacitor values, types
and ESR (anyCAP *). A capacitor as low as 0.47
μ
F is all that
is needed for stability. However, larger capacitors can be used if
high output current surges are anticipated. T he ADP3301 is
stable with extremely low ESR capacitors (ESR
≈
0), such as
multilayer ceramic capacitors (MLCC) or OSCON.
Input Bypass Capacitor: an input bypass capacitor is not
required; however, for applications where the input source is
high impedance or far from the input pins, a bypass capacitor is
recommended. Connecting a 0.47
μ
F capacitor from the input
pins (Pins 7 and 8) to ground reduces the circuit’s sensitivity to
PC board layout. If a bigger output capacitor is used, the input
capacitor should be 1
μ
F minimum.
Low ESR capacitors offer better performance on a noisy supply;
however, for less demanding requirements a standard tantalum
or aluminum electrolythic capacitor is adequate.
Noise Reduction
A noise reduction capacitor (C
NR
) can be used to further reduce
the noise by 6 dB–10 dB (Figure 20). Low leakage capacitors in
the 10 nF–100 nF range provide the best performance. Since
the noise reduction pin (NR) is internally connected to a high
impedance node, any connection to this node should be carefully
done to avoid noise pickup from external sources. T he pad
connected to this pin should be as small as possible. Long PC
board traces are not recommended.
IN
OUT
ERR
GND
ADP3301-5.0
NR
+
6
7
8
1
2
3
4
5
ON
OFF
+
SD
C
10nF
C2
10μF
R1
330k
E
OUT
C1
1μF
V
OUT
= 5V
V
IN
Figure 20. Noise Reduction Circuit
T hermal Overload Protection
T he ADP3301 is protected against damage due to excessive
power dissipation by its thermal overload protection circuit,
which limits the die temperature to a maximum of 165
°
C.
Under extreme conditions (i.e., high ambient temperature and
high power dissipation) where die temperature starts to rise
above 165
°
C, the output current is reduced until die tempera-
ture has dropped to a safe level. Output current is restored when
the die temperature is reduced.
Current and thermal limit protections are intended to protect
the device against accidental overload conditions. For normal
operation, device power dissipation should be externally limited
so that junction temperatures will not exceed 125
°
C.
Calculating Junction T emperature
Device power dissipation is calculated as follows :
PD = (V
IN
– V
OUT
) I
LOAD
+ (V
IN
) I
GND
Where
I
LOAD
and
I
GND
are load current and ground current,
V
IN
and
V
OUT
are input and output voltages respectively.
Assuming
I
LOAD
= 100 mA,
I
GND
= 2 mA,
V
IN
= 9 V and
V
OUT
= 5.0 V, device power dissipation is:
PD
= (9
V
– 5
V
) 100
mA
+ (9
V
) 2
mA
= 418
mW
T he proprietary package used in ADP3301 has a thermal
resistance of 96
°
C/W, significantly lower than a standard
8-pin SOIC package at 170
°
C/W.
Junction temperature above ambient temperature will be
approximately equal to :
0.418
W
×
96
°
C/W = 40.1
°
C
T o limit the maximum junction temperature to 125
°
C, maxi-
mum ambient temperature must be lower than:
T
A(MAX )
= 125
°
C – 40.1
°
C = 84.9
°
C
Printed Circuit Board Layout Consideration
All surface mount packages rely on the traces of the PC board to
conduct heat away from the package.
In standard packages the dominant component of the heat
resistance path is the plastic between the die attach pad and the
individual leads. In typical thermally enhanced packages, one or
more of the leads are fused to the die attach pad, significantly
decreasing this component. However, to make the improvement
meaningful, a significant copper area on the PCB has to be
attached to these fused pins.
T he ADP3301’s patented thermal coastline lead frame design
uniformly minimizes the value of the dominant portion of the
thermal resistance. It ensures that heat is conducted away by all
pins of the package. T his yields a very low 96
°
C/W thermal
resistance for an SO-8 package, without any special board
layout requirements, relying on the normal traces connected to
the leads. T he thermal resistance can be decreased by approxi-
mately an additional 10% by attaching a few square cm of
copper area to the V
IN
pin of the ADP3301 package.
相關PDF資料 |
PDF描述 |
|---|---|
| ADP3304 | Replaced by BQ24751B : Multi-Cell Synchronous Switch-mode Charger with System Power Selector with Low Iq 28-VQFN -40 to 125 |
| ADP3306 | High Accuracy anyCAP⑩ 100 mA Low Dropout Linear Regulator |
| ADP3301 | 100 mA Low Dropout Linear Regulator(高精度低壓差線性穩壓器) |
| ADP3302 | 100 mA Low Dropout Dual Linear Regulator(高精度低壓差雙線性穩壓器) |
| ADP3303AARU-REEL | High Accuracy anyCAP⑩ Adjustable 200 mA Low Dropout Linear Regulator |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADP3301AR-5.0 | 制造商:Analog Devices 功能描述:IC SEMICONDUCTOR ((NS)) |
| ADP3301AR-5-REEL | 功能描述:IC REG LDO 5V .1A 8-SOIC RoHS:否 類別:集成電路 (IC) >> PMIC - 穩壓器 - 線性 系列:anyCAP® 標準包裝:1 系列:- 穩壓器拓?fù)浣Y(jié)構:正，固定式 輸出電壓:3.3V 輸入電壓:2.5 V ~ 5.5 V 電壓 - 壓降（標準）:0.1V @ 200mA 穩壓器數量:2 電流 - 輸出:300mA 電流 - 限制（最?。?350mA 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:8-UFQFN 供應商設備封裝:8-MLPQ-UT（1.5x1.5） 包裝:剪切帶 (CT) 產品目錄頁面:1358 (CN2011-ZH PDF) 其它名稱:SC560HULCT |
| ADP3301ARZ-2.7 | 功能描述:IC REG LDO 2.7V .1A 8SOIC RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - 線性 系列:anyCAP® 產品培訓模塊:More Information on LDOs 標準包裝:50 系列:- 穩壓器拓?fù)浣Y(jié)構:正，固定式 輸出電壓:3.3V 輸入電壓:最高 15V 電壓 - 壓降（標準）:1.1V @ 800mA 穩壓器數量:1 電流 - 輸出:800mA 電流 - 限制（最?。?800mA 工作溫度:0°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:TO-263-4，D²Pak（3 引線+接片），TO-263AA 供應商設備封裝:D2PAK-3 包裝:管件 |
| ADP3301ARZ-3 | 功能描述:IC REG LDO 3V .1A 8SOIC RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - 線性 系列:anyCAP® 標準包裝:3,000 系列:- 穩壓器拓?fù)浣Y(jié)構:正，固定式 輸出電壓:3V 輸入電壓:最高 5.5V 電壓 - 壓降（標準）:0.12V @ 150mA 穩壓器數量:1 電流 - 輸出:150mA（最小值） 電流 - 限制（最?。?220mA 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:SOT-23-5 細型，TSOT-23-5 供應商設備封裝:TSOT-23-5 包裝:帶卷 (TR) 其它名稱:ADP160AUJZ-3.0-R7TR |
| ADP3301ARZ-3.2 | 功能描述:IC REG LDO 3.2V .1A 8SOIC RoHS:是 類別:集成電路 (IC) >> PMIC - 穩壓器 - 線性 系列:anyCAP® 產品培訓模塊:More Information on LDOs 標準包裝:50 系列:- 穩壓器拓?fù)浣Y(jié)構:正，固定式 輸出電壓:3.3V 輸入電壓:最高 15V 電壓 - 壓降（標準）:1.1V @ 800mA 穩壓器數量:1 電流 - 輸出:800mA 電流 - 限制（最?。?800mA 工作溫度:0°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:TO-263-4，D²Pak（3 引線+接片），TO-263AA 供應商設備封裝:D2PAK-3 包裝:管件 |
發布緊急采購，3分鐘左右您將得到回復。