
ADN4664
Rev. 0 | Page 3 of 12
SPECIFICATIONS
VDD = 3.0 V to 3.6 V; CL = 15 pF to GND; all specifications TMIN to TMAX, unless otherwise noted.
Table 1.
Symbol
Min
Max
Unit
Conditions/Comments
LVDS INPUT
High Threshold at RINx+, RINx3 VTH
+100
mV
VCM = 1.2 V, 0.05 V, 2.95 V
Low Threshold at RINx+, RINx3 VTL
100
mV
VCM = 1.2 V, 0.05 V, 2.95 V
Input Current at RINx+, RINx
IIN
10
±1
+10
μA
VIN = 2.8 V, VCC = 3.6 V or 0 V
10
±1
+10
μA
VIN = 0 V, VCC = 3.6 V or 0 V
20
±1
+20
μA
VIN = 3.6 V, VCC = 0 V
OUTPUT
Output High Voltage
VOH
2.7
3.1
V
IOH = 0.4 mA, VID = +200 mV
2.7
3.1
V
IOH = 0.4 mA, input terminated
2.7
3.1
V
IOH = 0.4 mA, input shorted
Output Low Voltage
VOL
0.3
0.5
V
IOL = 2 mA, VID = 200 mV
Output Short-Circuit Current
4IOS
15
47
100
mA
Enabled, VOUT = 0 V
Input Clamp Voltage
VCL
1.5
0.8
V
ICL = 18 mA
POWER SUPPLY
No Load Supply Current
ICC
5.4
9
mA
Inputs open
ESD PROTECTION
RINx+, RINx Pins
±15 kV
Human body model
All Pins Except RINx+, RINx
±4 kV
Human body model
1 Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground unless otherwise specified.
2 All typicals are given for: VCC = 3.3 V, TA = 25°C.
3 VCC is always higher than RINx+ and RINx voltage. RINx and RINx+ are allowed to have a voltage range of 0.2 V to VCC VID/2. However, to be compliant with ac
specifications, the common voltage range is 0.1 V to 2.3 V.
4 Output short-circuit current (IOS) is specified as magnitude only; the minus sign indicates direction only. Only one output should be shorted at a time. Do not exceed
maximum junction temperature specification.