參數資料
型號： AD9848
廠商： Analog Devices, Inc.
英文描述： CCD Signal Processors with Integrated Timing Driver
中文描述： CCD信號處理器集成時序驅動
文件頁數： 30/36頁
文件大?。?/td> 347K
代理商： AD9848
REV. 0
AD9848/AD9849
–30–
Optical Black Clamp
The optical black clamp loop is used to remove residual offsets in
the signal chain and to track low-frequency variations in the CCD’s
black level. During the optical black (shielded) pixel interval on
each line, the ADC output is compared with a fixed black level
reference, selected by the user in the Clamp Level Register. The
value can be programmed between 0 LSB and 63.75 LSB on the
AD9848, and between 0 LSB and 255 LSB on the AD9849. The
clamp level can be programmed with 8-bit resolution. The result-
ing error signal is filtered to reduce noise, and the correction value
is applied to the ADC input through a D/A converter. Normally,
the optical black clamp loop is turned on once per horizontal line,
but this loop can be updated more slowly to suit a particular
application. If external digital clamping is used during the post
processing, the AD9848/AD9849 optical black clamping may be
disabled using Bit D2 in the OPRMODE Register. When the loop
is disabled, the Clamp Level Register may still be used to provide
programmable offset adjustment.
The CLPOB pulse should be placed during the CCD’s optical
black pixels. It is recommended that the CLPOB pulse duration
be at least 20 pixels wide to minimize clamp noise. Shorter pulse-
widths may be used, but clamp noise may increase, and the ability
to track low-frequency variations in the black level will be reduced.
See the section on Horizontal Clamping and Blanking and also
the Applications Information section for timing examples.
A/D Converter
The AD9848/AD9849 uses high-performance 10-bit/12-bit
ADC architecture, optimized for high speed and low power.
Differential Nonlinearity (DNL) performance is typically better
than 0.5 LSB. The ADC uses a 2 V input range. Better noise
performance results from using a larger ADC full-scale range.
See TPC 1–TPC 4 for typical linearity and noise performance
plots for the AD9848/AD9849.
相關PDF資料
PDF描述
AD9849 CCD Signal Processors with Integrated Timing Driver
AD9849KST CCD Signal Processors with Integrated Timing Driver
AD9851 CMOS 180 MHz DDS/DAC Synthesizer
AD9852 CMOS 300MHz Complete-DDS Synthesizer
AD9853 Programmable Digital QPSK/16-QAM Modulator(可編程數字的四相移鍵控/16-正交幅度調制的調節器)
相關代理商/技術參數
參數描述
AD9848AKST 制造商:Analog Devices 功能描述:AFE Video 1ADC 10-Bit 3V/3.3V 48-Pin LQFP 制造商:Analog Devices 功能描述:AFE VID 1ADC 10-BIT 3V/3V/3.3V/3.3V/3.3V/3.3V/3.3V 48LQFP - Bulk 制造商:Rochester Electronics LLC 功能描述:10 BIT 20 MSPS CCD SIGNAL PROCESSOR - Tape and Reel
AD9848AKSTRL 制造商:Analog Devices 功能描述:AFE Video 1ADC 10-Bit 3V/3.3V 48-Pin LQFP T/R 制造商:Analog Devices 功能描述:AFE VID 1ADC 10-BIT 3V/3V/3.3V/3.3V/3.3V/3.3V/3.3V 48LQFP - Tape and Reel
AD9848AKSTZ 制造商:Analog Devices 功能描述:
AD9848AKSTZRL 制造商:Analog Devices 功能描述:
AD9848KST 制造商:Rochester Electronics LLC 功能描述:10 BIT 18 MSPS 3V AFE & T - Bulk
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*