參數資料
型號: AD7851ANZ
廠商: Analog Devices Inc
文件頁數: 10/36頁
文件大?。?/td> 0K
描述: IC ADC 14BIT SRL 333KSPS 24-DIP
產品變化通告: Product Discontinuance 27/Oct/2011
標準包裝: 15
位數: 14
采樣率(每秒): 333k
數據接口: 8051,QSPI?,串行,SPI? µP
轉換器數目: 2
功率耗散(最大): 89.25mW
電壓電源: 模擬和數字
工作溫度: -40°C ~ 85°C
安裝類型: 通孔
封裝/外殼: 24-DIP(0.300",7.62mm)
供應商設備封裝: 24-PDIP
包裝: 管件
輸入數目和類型: 1 個偽差分,單極;1 個偽差分,雙極
AD7851
–18–
REV. B
REFERENCE SECTION
For specified performance, it is recommended that when using
an external reference this reference should be between 4 V and
the analog supply AVDD. The connections for the relevant refer-
ence pins are shown in the typical connection diagrams. If the
internal reference is being used, the REFIN/REFOUT pin should
have a 100 nF capacitor connected to AGND very close to the
REFIN/REFOUT pin. These connections are shown in Figure 18.
If the internal reference is required for use external to the ADC,
it should be buffered at the REFIN/REFOUT pin and a 100 nF
capacitor connected from this pin to AGND. The typical noise
performance for the internal reference with 5 V supplies is
150 nV/
√Hz @ 1 kHz and dc noise is 100 V p-p.
REFIN/REFOUT
AD7851
ANALOG
SUPPLY
5V
AVDD
DVDD
0.01 F
0.1 F
10 F
CREF1
CREF2
0.01 F
0.1 F
470nF
0.1 F
10
Figure 18. Relevant Connections When Using
Internal Reference
The other option is that the REFIN/REFOUT pin be overdriven
by connecting it to an external reference. This is possible due to
the series resistance from the REFIN/REFOUT pin to the internal
reference. This external reference can have a range that includes
AVDD. When using AVDD as the reference source, the 100 nF
capacitor from the REFIN/REFOUT pin to AGND should be as
close as possible to the REFIN/REFOUT pin, and also the CREF1
pin should be connected to AVDD to keep this pin at the same
level as the reference. The connections for this arrangement are
shown in Figure 19. When using AVDD it may be necessary to
add a resistor in series with the AVDD supply. This will have the
effect of filtering the noise associated with the AVDD supply.
REFIN/REFOUT
AD7851
ANALOG
SUPPLY
5V
AVDD
DVDD
0.01 F
0.1 F
10 F
CREF1
CREF2
0.01 F
470nF
0.1 F
10
Figure 19. Relevant Connections When Using AVDD
as the Reference
AD7851 PERFORMANCE CURVES
Figure 20 shows a typical FFT plot for the AD7851 at 333 kHz
sample rate and 10 kHz input frequency.
FREQUENCY (kHz)
0
–20
–120
0
100
20
SNR
(dB)
40
60
80
–40
–60
–80
–100
AVDD = DVDD = 5V
f
SAMPLE = 333kHz
f
IN = 10kHz
SNR = 79.5dB
THD = –95.2
Figure 20. FFT Plot
Figure 21 shows the SNR versus frequency for a 5 V supply and
a 4.096 external reference (5 V reference is typically 1 dB better
performance).
INPUT FREQUENCY (kHz)
79
75
0
166
20
50
120
140
78
77
76
S(N+D)
RATIO
(dB)
10
80
100
Figure 21. SNR vs. Frequency
Figure 22 shows the power supply rejection ratio versus fre-
quency for the part. The power supply rejection ratio is defined
as the ratio of the power in ADC output at frequency f to the
power of a full-scale sine wave.
PSRR (dB) = 10 log (Pf/Pfs)
Pf is the power at frequency f in ADC output, Pfs is the power
of a full-scale sine wave. Here a 100 mV peak-to-peak sine wave
is coupled onto the AVDD supply while the digital supply is left
unaltered.
相關PDF資料
PDF描述
AD7853BNZ IC ADC 12BIT SRL 200KSPS 24-DIP
AD7854BRZ IC ADC 12BIT PARALLEL LP 28-SOIC
AD7856ARZ-REEL7 IC ADC 14BIT 8CHAN 5V 24SOIC
AD7858LBNZ IC ADC 12BIT 8CHAN SRL 24DIP
AD7859BSZ IC ADC 12BIT 8CHAN LP 44-MQFP
相關代理商/技術參數
參數描述
AD7851AR 制造商:Analog Devices 功能描述:ADC Single SAR 333ksps 14-bit Serial 24-Pin SOIC W 制造商:Rochester Electronics LLC 功能描述:14 BIT SELF CALIBRATION ADC I.C. - Bulk
AD7851AR-REEL 制造商:Analog Devices 功能描述:ADC Single SAR 333ksps 14-bit Serial 24-Pin SOIC W T/R
AD7851ARS 制造商:Analog Devices 功能描述:ADC Single SAR 333ksps 14-bit Serial 24-Pin SSOP 制造商:Analog Devices 功能描述:IC 14-BIT ADC
AD7851ARS-REEL 制造商:Analog Devices 功能描述:ADC Single SAR 333ksps 14-bit Serial 24-Pin SSOP T/R
AD7851ARSZ 功能描述:IC ADC 14BIT SRL 333KSPS 24SSOP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 標準包裝:1,000 系列:- 位數:12 采樣率(每秒):300k 數據接口:并聯 轉換器數目:1 功率耗散(最大):75mW 電壓電源:單電源 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:24-SOIC(0.295",7.50mm 寬) 供應商設備封裝:24-SOIC 包裝:帶卷 (TR) 輸入數目和類型:1 個單端,單極;1 個單端,雙極