- 您現在的位置：買賣IC網 > PDF目錄3425 > AD746BQ (Analog Devices Inc)IC OPAMP BIFET 13MHZ DUAL 8CDIP PDF資料下載
參數資料
| 型號： | AD746BQ |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 6/8頁 |
| 文件大小： | 0K |
| 描述： | IC OPAMP BIFET 13MHZ DUAL 8CDIP |
| 標準包裝： | 1 |
| 放大器類型： | J-FET |
| 電路數： | 2 |
| 轉換速率： | 75 V/µs |
| 增益帶寬積： | 13MHz |
| -3db帶寬： | 13MHz |
| 電流 - 輸入偏壓： | 110pA |
| 電壓 - 輸入偏移： | 250µV |
| 電流 - 電源： | 7mA |
| 電流 - 輸出 / 通道： | 25mA |
| 電壓 - 電源，單路/雙路(±)： | 9 V ~ 36 V，±4.5 V ~ 18 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 通孔 |
| 封裝/外殼： | 8-CDIP（0.300"，7.62mm） |
| 供應商設備封裝： | 8-CERDIP |
| 包裝： | 管件 |
AD746
–6–
REV. B
POWER SUPPLY BYPASSING
The power supply connections to the AD746 must maintain a
low impedance to ground over a bandwidth of 13 MHz or more.
This is especially important when driving a significant resistive
or capacitive load, since all current delivered to the load comes
from the power supplies. Multiple high quality bypass capacitors
are recommended for each power supply line in any critical
application. A 0.1
F ceramic and a 1 F tantalum capacitor as
shown in Figure 20 placed as close as possible to the amplifier
(with short lead lengths to power supply common) will assure
adequate high frequency bypassing, in most applications. A
minimum bypass capacitance of 0.1
F should be used for any
application.
If only one of the two amplifiers inside the AD746 is to be
utilized, the unused amplifier should be connected as shown in
Figure 21a. Note that the noninverting input should be
grounded and that RL and CL are not required.
Figure 19. THD Test Circuit
Figure 22a. Unity Gain Inverter
Figure 21a. Gain of 2 Follower
Figure 21b. Gain of 2 Follower
Large Signal Pulse Response
Figure 21c. Gain of 2 Follower
Small Signal Pulse Response
Figure 22b. Unity Gain Inverter
Large Signal Pulse Response
Figure 22c. Unity Gain Inverter
Small Signal Pulse Response
Figure 20. Power Supply
Bypassing
相關PDF資料 |
PDF描述 |
|---|---|
| 87837-130HLF | BERGSTIK II DR STRAIGHT RET |
| 69192-212 | BERGSTIK II DR STRAIGHT RET |
| 552699-1 | CONN TERM 28-18AWG .125" TIN |
| 552699-4 | TERMINAL AMP-BARREL 3.18MM |
| 591613-5 | CONN 5MOD STANDARD RAIL 84.86MM |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD746CH | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Voltage-Feedback Operational Amplifier |
| AD746CQ | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Voltage-Feedback Operational Amplifier |
| AD746J | 制造商:AD 制造商全稱:Analog Devices 功能描述:Dual Precision, 500 ns Settling, BiFET Op Amp |
| AD746JN | 功能描述:IC OPAMP BIFET 13MHZ DUAL 8DIP RoHS:否 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:1 系列:- 放大器類型:通用 電路數:4 輸出類型:滿擺幅 轉換速率:0.6 V/µs 增益帶寬積:1MHz -3db帶寬:- 電流 - 輸入偏壓:2pA 電壓 - 輸入偏移:1000µV 電流 - 電源:85µA 電流 - 輸出 / 通道:20mA 電壓 - 電源，單路/雙路(±):1.8 V ~ 6 V 工作溫度:-40°C ~ 125°C 安裝類型:表面貼裝 封裝/外殼:14-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:14-SOICN 包裝:剪切帶 (CT) 產品目錄頁面:680 (CN2011-ZH PDF) 其它名稱:MCP6L04T-E/SLCT |
| AD746JNZ | 功能描述:IC OPAMP BIFET 13MHZ DUAL 8DIP RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:2,500 系列:- 放大器類型:通用 電路數:4 輸出類型:- 轉換速率:0.6 V/µs 增益帶寬積:1MHz -3db帶寬:- 電流 - 輸入偏壓:45nA 電壓 - 輸入偏移:2000µV 電流 - 電源:1.4mA 電流 - 輸出 / 通道:40mA 電壓 - 電源，單路/雙路(±):3 V ~ 32 V，±1.5 V ~ 16 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) 其它名稱:LM324ADTBR2G-NDLM324ADTBR2GOSTR |
發布緊急采購，3分鐘左右您將得到回復。