
Dimensions: inch (mm)
Nominal Frequency
Operating Temperature
Storage Temperature
Frequency Tolerance
Frequency Stability
Equivalent Series Resistance
Load Capacitance CL
Shunt Capacitance
Drive Level
Aging at 25°C/year
Insulation Resistance
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
ABRACON IS
ISO 9001 / QS 9000
CERTIFIED
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
|||||||||||||||
AB206
LOW FREQUENCY CYLINDRICAL WATCH CRYSTAL
STANDARD SPECIFICATIONS:
OUTLINE DRAWING:
TABLE 1:
OPTIONS AND PART IDENTIFICATION (Left blank if standard):
ENVIRONMENTAL SPECIFICATIONS:
Drop test: ±5ppm max. with natural drop on a hard wood board at 75cm, 3 times or shock
test of 3,000g x 0.3ms. X 1/2 sine wave, 3 directions.
Marking: Dip units in solvents,10 strokes with brush,3 times.
Sealing: 1x10E-2 Pa.m3/s max.
Soldering: Lead wires should be soldered within 105 with the iron heated to a temperature no
higher than 270°C.
6.2 x 2.1mm
20.000 to 29.999 (Fund)
30
9.000 to 12.999 (Fund)
60
13.000 to 15.999 (Fund)
50
30.000 to 70.000 (3
rd
100
Frequency Range (MHz)
90
6.000 to 6.999 (Fund)
Max ESR (
)
40
16.000 to 19.999 (Fund)
60
7.000 to 8.999 (Fund)
AB206 - Frequency - CL - ESR - Tolerance - Stability - Packaging
Freq Stability options:
U for ± 10 ppm max.
G for ± 15 ppm max.
X for ± 20 ppm max.
W for ± 25 ppm max.
H for ± 35 ppm max.
Z for ± 50 ppm max.
Freq Tolerance options:
1 for ± 10 ppm max.
7 for ± 15 ppm max.
2 for ± 20 ppm max.
3 for ± 25 ppm max.
5 for ± 50 ppm max.
CL options:
Load cap. in pF (minimum 10 pF)
S for Series Resonance
ESR options:
RXXX (value in ohms max.)
Packaging option:
T for Tape and Reel
rev1.2-5/05
APPLICATIONS:
Communications equipment
Measuring instruments
FEATURES:
Miniature high frequency crystals
Excellent frequency vs. temperature stability
Industrial temperature range available
*RoHS COMPLIANT
Hand held devices
Portable electronics
Microprocessor clocks
PARAMETERS
6.000MHz - 27.000MHz
-10°C to + 60°C
-40°C to +85°C
± 30 ppm max. at +25°C (see option)
± 30 ppm max. (see option)
See Table 1
16pF (see option)
7pF
500
W max., 100W correlation
± 5ppm max.
500 M
min. at 100 Vdc ± 15V