參數資料
型號: 9704-11
廠商: PEREGRINE SEMICONDUCTOR CORP
元件分類: PLL合成/DDS/VCOs
英文描述: 3.0 GHz Integer-N PLL for Rad Hard Apllications
中文描述: PHASE LOCKED LOOP, CQCC44
封裝: CERAMIC, QFJ-44
文件頁數: 9/10頁
文件大?。?/td> 247K
代理商: 9704-11
Product Specification
PE9704
Page 8 of 10
2003-2006 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0083-03
│ UltraCMOS RFIC Solutions
Figure 4. Serial Interface Mode Timing Diagram
t
DHLD
t
DSU
t
ClkH
t
ClkL
t
CWR
t
PW
t
WRC
t
EC
t
CE
E_WR
DATA
CLOCK
S_WR
PD_U pulses result in an increase in VCO
frequency and
PD_D results in a decrease in VCO
frequency.
Software tools for designing the active loop filter
can be found at Peregrine’s web site:
www.psemi.com
Lock Detect Output
A lock detect signal is provided at pin LD, via the
pin CEXT (see Figure 1). CEXT is the logical “NAND”
of PD_
U and PD_D waveforms, driven through a
series 2 k
resistor. Connecting C
EXT to an
external shunt capacitor provides integration of
this signal.
Enhancement Register
The functions of the enhancement register bits are shown below. All bits are active high. Operation is
undefined if more than one output is sent to DOUT.
Table 9. Enhancement Register Bit Functionality
** Program to 0
Phase Detector Outputs
The phase detector is triggered by rising edges
from the main counter (fp) and the reference
counter (fc). It has two outputs, PD_U, and PD_D.
If the divided VCO leads the divided reference in
phase or frequency (fp leads fc), PD_D pulses
“l(fā)ow”. If the divided reference leads the divided
VCO in phase or frequency (fc leads fp), PD_U
pulses “l(fā)ow”. The width of either pulse is directly
proportional to phase offset between the two input
signals, fp and fc. The phase detector gain is
430 mV / radian.
PD_U and PD_D are designed to drive an active
loop filter which controls the VCO tune voltage.
Bit Function
Description
Bit 0
Reserved**
Bit 1
Reserved**
Bit 2
fp output
Drives the M counter output onto the DOUT output.
Bit 3
Power down
Power down of all functions except programming interface.
Bit 4
Counter load
Immediate and continuous load of counter programming.
Bit 5
MSEL output
Drives the internal dual modulus prescaler modulus select (MSEL) onto the DOUT output.
Bit 6
fc output
Drives the R counter output onto the DOUT output
Bit 7
PB
Allows Fin to bypass the 10/11 prescaler
相關PDF資料
PDF描述
971-36006-21 36 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT
971-36006-31 36 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT
971-36009-21 36 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT
971-36009-31 36 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT
971-36010-21 36 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, PRESS FIT
相關代理商/技術參數
參數描述
97042002 制造商:Laird Technologies Inc 功能描述:CSTR FRG BF
97042004 制造商:Laird Technologies Inc 功能描述:CSTR FRG AG
97042019 制造商:Laird Technologies Inc 功能描述:CSTR FRG NIB
97042031 制造商:Laird Technologies Inc 功能描述:OSTRSDRNG ECE089
970420361 功能描述:Hex Spacer Threaded M3x0.5 Steel 1.654" (42.00mm) 制造商:wurth electronics inc 系列:WA-SSTII 零件狀態:新產品 類型:六角襯墊 有絲/無絲:有螺紋 公母:母頭,母頭 螺釘,螺紋規格:M3x0.5 直徑 - 內部:- 直徑 - 外部:0.236"(6.00mm) 六角形 板間高度:1.654"(42.00mm) 長度 - 總:1.654"(42.00mm) 特性:表面貼裝型 材料:鋼 鍍層:鋅 顏色:- 重量:- 標準包裝:750