
Go to Philips Semiconductors' home page
Select & Go...
Start
part
Catalog & Datasheets
Catalog by Function
Discrete semiconductors
Audio
Clocks and Watches
Data communications
Microcontrollers
Peripherals
Standard analog
Video
Wired communications
Wireless communications
Catalog by System
Automotive
Consumer Multimedia
Systems
Communications
PC/PC-peripherals
Cross reference
Models
Packages
Application notes
Selection guides
Other technical documentation
End of Life information
Datahandbook system
Relevant Links
About catalog tree
About search
About this site
Subscribe to eNews
Catalog & Datasheets
Search
TDA8552T;
TDA8552TS
TDA8552T;
TDA8552TS
Information as of 2000-08-22
TDA8552T; TDA8552TS; 2 x 1.4 W BTL audio amplifiers with digital volume control and headphone sensing
The TDA8552T is a two channel audio power amplifier that provides an output power of 2 x 1.4 W into an 8
load using a 5 V power
supply. The circuit contains two BTL power amplifiers, two digital volume controls and standby/mute logic. Volume and balance of the
amplifiers are controlled using two digital input pins which can be driven by simple push-buttons or by a microcontroller.
Using the selection pin (GAINSEL) the maximum gain can be set at 20 or 30 dB. The headphone sense input (HPS) can be used to detect
if a headphone is plugged into the jack connector. If a headphone is plugged into the jack connector the amplifier switches from the BTL to
the SE mode and the BTL loudspeakers are switched off. This also results in a reduction of quiescent current consumption.
The TDA8552T is contained in a 20-pin small outline package. For the TDA8552TS, which is contained in a 20-pin very small outline
package, the maximum output power is limited by the maximum allowed ambient temperature. More information can be found in Section
'Thermal design considerations'. The SO20 package has the four corner leads connected to the die pad so that the thermal behaviour can
be improved by the PCB layout.
l
One pin digital volume control (for each channel)
l
Volume setting with up/down pulses
l
Auto repeat function on volume setting
l
Headphone sensing
l
Maximum gain set by selection pin
l
Low sensitivity for EMC radiation
l
Internal feedback resistors
l
Flexibility in use
l
Few external components
l
Low saturation voltage of output stage
Description
Features
Applications
Datasheet
Products, packages, availability and ordering
Find similar products
To be kept informed on TDA8552T; TDA8552TS,
subscribe to eNews.
Subscribe
to eNews
Description
Features