
Philips Semiconductors - PIP - 74LVC162374A; 74LVCH162374A; 16-bit edge triggered D-type flip-flop with 30 Ohm series termination resistors; 5 V input/output tolerant; 3-state
The 74LVC(H)162374A is a 16-bit edge triggered flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs
for bus oriented applications. The 74LVC162374A consists of 2 sections of eight edge-triggered flip-flops. A clock (CP) input and
an output enable (OE) are provided for each octal. Inputs can be driven from either 3.3 or 5 V devices. In 3-state operation, outputs
can handle 5 V. These features allow the use of these devices in a mixed 3.3 and 5 V environment.
The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-
HIGH CP transition.
When OE is LOW, the contents of the flip-flops are available at the outputs. When OE is HIGH, the outputs go to the high-
impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops.
The 74LVCH162374A bus hold data inputs eliminates the need for external pull up resistors to hold unused inputs.
The 74LVC(H)162374A is designed with 30
series termination resistors in both HIGH and LOW output stages to reduce line
noise.
q
ESD protection:
HBM EIA/JESD22-A114-A
exceeds 2000 V
MM EIA/JESD22-A115-A
exceeds 200 V
q
5 V tolerant input/output for
interfacing with 5 V logic
q
Wide supply voltage range of
1.2 to 3.6 V
q
Complies with JEDEC standard
no. 8-1A
q
CMOS low power consumption
q
MULTIBYTE
flow-through
standard pin-out architecture
q
Low inductance multiple power and
ground pins for minimum noise and
ground bounce
file:///G|/imaging/BITTING/CPL/20030424/04232003_9/PHGL/_HTML04232003/74LVCH162374ADL.html (2 of 5) [May-12-2003 11:50:07 AM]