參數資料
            型號: 933740730118
            廠商: NXP SEMICONDUCTORS
            元件分類: 顯示驅動器
            英文描述: LIQUID CRYSTAL DISPLAY DRIVER, PDSO56
            封裝: PLASTIC, VSOP-56
            文件頁數: 7/44頁
            文件大小: 192K
            代理商: 933740730118
            2001 Oct 02
            15
            Philips Semiconductors
            Product specication
            Universal LCD driver for low multiplex rates
            PCF8576
            6.9
            Segment outputs
            The LCD drive section includes 40 segment outputs
            pins S0 to S39 which should be connected directly to the
            LCD. The segment output signals are generated in
            accordance with the multiplexed backplane signals and
            with data resident in the display latch. When less than
            40 segment outputs are required the unused segment
            outputs should be left open-circuit.
            6.10
            Backplane outputs
            The LCD drive section includes four backplane outputs
            BP0 to BP3 which should be connected directly to the
            LCD. The backplane output signals are generated in
            accordance with the selected LCD drive mode. If less than
            four backplane outputs are required the unused outputs
            can be left open-circuit. In the 1 : 3 multiplex drive mode
            BP3 carries the same signal as BP1, therefore these two
            adjacent outputs can be connected together to give
            enhanced drive capabilities. In the 1 : 2 multiplex drive
            mode BP0 and BP2, BP1 and BP3 respectively carry the
            same signals and may also be paired to increase the drive
            capabilities. In the static drive mode the same signal is
            carried by all four backplane outputs and they can be
            connected in parallel for very high drive requirements.
            6.11
            Display RAM
            The display RAM is a static 40
            × 4-bit RAM which stores
            LCD data. A logic 1 in the RAM bit-map indicates the on
            state of the corresponding LCD segment; similarly, a
            logic 0 indicates the off state. There is a one-to-one
            correspondence between the RAM addresses and the
            segment outputs, and between the individual bits of a RAM
            word and the backplane outputs. The first RAM column
            corresponds to the 40 segments operated with respect to
            backplane BP0 (see Fig.10). In multiplexed LCD
            applications the segment data of the second, third and
            fourth column of the display RAM are time-multiplexed
            with BP1, BP2 and BP3 respectively.
            When display data is transmitted to the PCF8576 the
            display bytes received are stored in the display RAM in
            accordance with the selected LCD drive mode. To
            illustrate the filling order, an example of a 7-segment
            numeric display showing all drive modes is given in Fig.11;
            the RAM filling organization depicted applies equally to
            other LCD types.
            With reference to Fig.11, in the static drive mode the eight
            transmitted data bits are placed in bit 0 of eight successive
            display RAM addresses. In the 1 : 2 multiplex drive mode
            the eight transmitted data bits are placed in bits 0 and 1 of
            four successive display RAM addresses. In the 1 : 3
            multiplex drive mode these bits are placed in
            bits 0, 1 and 2 of three successive addresses, with bit 2 of
            the third address left unchanged. This last bit may, if
            necessary, be controlled by an additional transfer to this
            address but care should be taken to avoid overriding
            adjacent data because full bytes are always transmitted. In
            the 1 : 4 multiplex drive mode the eight transmitted data
            bits are placed in bits 0, 1, 2 and 3 of two successive
            display RAM addresses.
            Fig.10 Display RAM bit-map showing direct relationship between display RAM addresses and segment outputs,
            and between bits in a RAM word and backplane outputs.
            0
            1
            2
            3
            1234
            35
            36
            37
            38
            39
            display RAM addresses (rows) / segment outputs (S)
            display RAM bits
            (columns) /
            backplane outputs
            (BP)
            MBE525
            相關PDF資料
            PDF描述
            933774680026 LIQUID CRYSTAL DISPLAY DRIVER, U
            933841600005 LIQUID CRYSTAL DISPLAY DRIVER, U
            935064190005 LIQUID CRYSTAL DISPLAY DRIVER, U
            0560-6600-01 HDSL & MDSL MAGNETICS For Conexant Bt8960 and Bt8970
            0560-6600-02 HDSL & MDSL MAGNETICS For Conexant Bt8960 and Bt8970
            相關代理商/技術參數
            參數描述
            933748212 制造商:Lumberg Automation 功能描述:CONNECTOR, GDML 3011 LED 230 RG, DIN VALVE, CLEAR/BLACK, 3C + GROUND, LED, PG 11 制造商:Hirschmann Electronics GmbH & Co Kg 功能描述:GDML 250V black socket red/green LED
            93378-003 制造商:FCI 功能描述:MEMORY CARD RECEPTACLE - Bulk
            9337-A17R 制造商:GC Electronics 功能描述:
            9337C 制造商:Hubbell Premise Wiring 功能描述:
            9337-CHR-100 制造商:Belden Inc 功能描述: