- 您現在的位置：買賣IC網 > PDF目錄360596 > 92100 ION VECTOR SYSTEM PDF資料下載
參數資料
| 型號： | 92100 |
| 英文描述： | ION VECTOR SYSTEM |
| 中文描述： | 離子載體系統 |
| 文件頁數： | 3/3頁 |
| 文件大?。?/td> | 59K |
| 代理商： | 92100 |
Unit 17. Millbrook Business Park, Sybron Way Crowborough, East Sussex TN6 3JZ United Kingdom
Phone: 00 44 (0) 1892-665313, Fax: 00 44 (0) 1892-668838 E-mail: info@charleswater.co.uk, Internet: www.charleswater.co.uk
PPE-5056.E
Page 3 of 3
Charleswater Europe Ltd.
Figure 7. Installing controller to bench.
Once you have installed the base of the
controller, you can now install the Ion
Vector Attachment to the bench. A
bracket is included with the unit to
facilitate easy mounting. Install bracket to
the bench. Position the base of the Ion
Vector over the bracket and slide it on.
Position the Ion Vector so that the ion
flow is focused on the equipment or area
to be ionised.
Figure 8. Installation of Ion Vector to
bench.
The 92100 can also be used in areas
where a conveyor is used to transport
equipment. By adding an 92117
photoelectric sensor you can protect and
neutralize moving objects without the use
of an operator. The photoelectric sensor
will automatically detect any moving
objects that pass between the sensor
and the reflector.
Figure 9. Photoelectric sensor and
reflector.
Neutralisation Efficiency
(Decay Time)
The comparative neutralisation efficiency
of ionisers is determined by a standard
test published by the ESD Association
Standard 3.1. The decay rates measured
using this standard are shown in the
chart below. This performance was
measured with the air nozzle at a
distance of 15cm from the charged plate
and utilizing an air pressure of 30 PSIG.
Decay Rate per EOS/ESD S-3.1
Test Pressure
Decay Rate
30 PSIG
<1 seconds
Charge Decay Time Constants
Notes: 1) Decay times are from 5000
volts to < 500 volts.
2) The air nozzle’s air stream is
perpendicular to the charged
plate.
Figure 10. EOS/ESD S-3.1 decay time
test set up.
Testing and Calibration
Ionisers are tested and calibrated using
a charged plate analyser. For proper
testing we recommend using our 99096
charged plate analyser and the
procedure outlined in ESD Association’s
Standard 3.1. This standard can be
obtained directly from the ESD
Association, 7902 Turin Road, Suite 4,
Rome, NY 13440-2069, (315) 339-6937.
Adjustment
Balance adjustment can be done by
using the side adjustment potentiometer
found on the side of the unit. Point ion
stream to normal use position and adjust
ionization output for best and most
efficient balance. Servicing should be
performed only at the factory, or by a
technician trained in high voltage circuits.
See warranty section for repair
information.
Figure 11. Balance Adjustment.
IMPORTANT: These units are
designed to work with the live and
neutral connections on the mains
plug, being the correct polarity. On
some European plug sockets the
polarity can be either way round.
Before plugging in your Ioniser,
Locking screw inside
unit helps secure
Vector Controller
Adjustment screw
15cm
please check the polarity of your
mains socket, and ensure that the live
and neutral match the live and neutral
pins on the mains socket.
We cannot accept liability for Ionisers
where the unit has been plugged into
the mains socket, with the polarity
reversed.
Please note that these units do
require a properly grounded wall
socket to function correctly.
Specifications
Input Voltage:
Amperage on:
Amperage in use:
Fuse:
220 VAC, 50 Hz
20 milliamps
200 milliamps
2ea 1 amp, 5 x
20mm, fast acting
2.5 watts on, 25
watts in use
One-piece Delrin
Two-piece molded
polyurethane
Power Usage:
Vector:
Air Gun:
Hose Length:
92100
92105
Control Box:
1.5 metres
2.1 metres
13cm H x 16cm W
x 18cm L
5 kilograms
3.5 CFM @ 30 PSI
Weight:
Air Usage:
Recommended PSI: 0 to 100 PSI
Air fittings:
6.35mm OD tubing
with 3.2mm NPT
with adjustable
needle valve.
Limited Warranty
Charleswater Europe expressly warrants that for a period of
one (1) year from the date of purchase, Charleswater Europe
Ionisers will be free of defects in material (parts) and
workmanship (labor). Within the warranty period, a unit will be
tested, repaired or replaced at Charleswater Europe’s option,
free of charge. Call Customer Service at 00 44 (0) 1892-
665313 for a Return Material Authorisation (RMA) and proper
shipping instructions and address. Include a copy of your
original packing slip, invoice, or other proof of date of
purchase. Any unit under warranty should be shipped prepaid
to the Charleswater Europe factory. Warranty repairs will take
approximately two weeks.
If your unit is out of warranty, Charleswater Europe will quote
repair charges necessary to bring your unit up to factory
standards. Call Customer Service at 00 44 (0) 1892-665313
for a Return Material Authorisation (RMA) and proper shipping
instructions and address. Ship your unit prepaid to the
Charleswater Europe factory.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU
OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED
AND IMPLIED, INCLUDING MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE WHICH ARE
SPECIFICALLY DISCLAIMED. The express warranty will not
apply to defects or damage due to accidents, neglect, misuse,
alterations, operator error, or failure to properly maintain, clean
or repair products.
Limit of Liability
Electronic ionisers use high voltage corona discharge and
should not be used in or near flammableor explosive
environments.
In no event will Charleswater Europe or any
seller be responsible or liable for any injury, loss or damage,
direct or consequential, arising out of the use of or the inability
to use the product. Before using, users shall determine the
suitability of the product for their intended use, and users
assume all risk and liability whatsoever in connection
therewith.
相關PDF資料 |
PDF描述 |
|---|---|
| 92108K | IC |
| 53113 | IC |
| 53114 | Dual/Triple Ultra-Low-Voltage SOT23 µP Supervisory Circuits |
| 53115 | IC |
| 53117 | Dual/Triple Ultra-Low-Voltage SOT23 µP Supervisory Circuits |
相關代理商/技術參數 |
參數描述 |
|---|---|
| 9-21000-0 | 制造商:TE Connectivity 功能描述:SCREW,CAP,SOCKET HEAD - Bulk |
| 9-21000-2 | 制造商:TE Connectivity 功能描述:SCREW,CAP,SOCKET HEAD - Bulk |
| 9-21000-3 | 制造商:TE Connectivity 功能描述:SCREW,CAP,SOCKET HEAD - Bulk 制造商:TE CONNECTIVITY 功能描述:SCREW,CAP,SOCKET HEAD |
| 9-21000-5 | 制造商:TE Connectivity 功能描述:SCREW,CAP,SOCKET HEAD - Bulk |
| 9-21000-9 | 制造商:TE Connectivity 功能描述:SCREW,CAP,SOCKET HEAD - Bulk 制造商:TE CONNECTIVITY 功能描述:SCREW,CAP,SOCKET HEAD |
發布緊急采購，3分鐘左右您將得到回復。