
8161SHZQE2
SPDT
8261SHZQE2
DPDT
U.S. Patent No. 4,095,070
SWITCHES WITH STANDARD OPTIONS
U.S. Patent No. 4,095,070
MOM. = Momentary
NOTE
: For PC termination, replace ‘Z’ with ‘C’.
For panel mounting information, see page B-51.
For PC mounting information, see page B-51.
NOTE
: For PC termination, replace ‘Z’ with ‘C’.
For panel mounting information, see page B-51.
For PC mounting information, see page B-51.
MOM. = Momentary
NOTE
: For PC mounting information, see page B-52.
SPDT
SECTION A-A
8168SH9ABE2
Alternate Action and Momentary Pushbutton Switches
C&K 8060 Series
P
B
B-47
www.ittcannon.com
ITT Industries
Cannon
Specifications
CONTACT RATING: Q contact material: 6 AMPS @ 120 V AC
or 28 V DC; 3 AMPS @ 250 V AC. See page B-55 for
additional ratings.
ELECTRICAL LIFE: 50,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 20 milliohms typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 10
9
ohms min.
DIELECTRIC STRENGTH: 1,000 V RMS min. @ sea level.
OPERATING TEMPERATURE: –30 C to 65 C
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
CAP INSTALLATION FORCE: 10 lbs. maximum permissible.
NOTE
: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Materials
CASE: Glass filled nylon 6/6 or diallyl phthalate (DAP),
flame retardant (UL 94V-0).
PLUNGER: S, S1, S2 Options: Glass filled nylon or glass filled
polyester (PBT) (UL 94V-0). L, L1 Options: Brass, nickel plated.
CAP & FRAME: Nylon, black standard.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, tin plated.
END CONTACTS: Q contact material: Coin silver, silver plated.
See page B-55 for additional contact materials.
CENTER CONTACT & ALL TERMINALS: Q contact material: Copper
alloy, silver plated. See page B-55 for additional contact materials.
TERMINAL SEAL: Epoxy
HARDWARE: Nut & Locking Ring: Brass, nickel plated;
Lockwasher: Steel, nickel plated.
POS. 1
POS. 2
PART NUMBER
FUNCTION
ON
8161SHZQE2
8168SHZQE2
SPDT
ON
ON
MOM.
POS. 1
POS. 2
PART NUMBER
FUNCTION
ON
8261SHZQE2
DPDT
POS. 1
POS. 2
PART NUMBER
FUNCTION
8168SH9ABE2
SPDT
ON