
6-25
Call Toll Free: 1 (800) 323-9612
.085 in. (2.16mm)
Density
Miniature Ribbon
Solder Cup
Metal Shell
Panel Mount
“Panel mount” products are connectors without hoods. They are typically used to provide signal I/O from a
system panel or cabinet, where strain relief to a cable jacket is not required.
Available with high barrier insulators that extend beyond the end of the solder cup, physically isolating
adjacent contacts.
Standard versions have .103" mounting holes (sockets have .103" with float bushings) for use with #3
hardware, or .185" mounting holes for use with #8 hardware.
Select sizes are available with .120" mounting holes for use with #4 hardware, or with integral panel
clips, which allow snap-in front mounting for more cost-effective assembly.
Bail latching sockets are available, as are bail latching plugs. While the plugs would not be panel-
mounted, they are available for premold/solder overmolding applications.
See page 6-4 for recommended standard panel cutout dimensions.
See page 6-51 for accessories such as mounting screws and dust covers, which make the use of Cinch
Miniature Ribbon connectors even more cost-effective in panel-mount applications.
See the appropriate cable connector section that follows for products that include hoods for
exposed-cable applications.
Dimensions
AB
C
Size
in
mm
in
mm
in
mm
14
1.750
44.45
1.417
35.99
0.910
23.11
24
2.175
55.25
1.842
46.79
1.335
33.91
36
2.685
68.20
2.352
59.74
1.845
46.86
50
3.260
82.80
2.947
74.85
2.440
61.98
B Max.
A Max.
B Max.