
Dialight Corporation
1501 Route 34 South Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 Fax: (1) 732-751-5778 www.dialight.com
Uniform non-pixelated appearance
Exceeds ITE PTCSI Part 2 requirements for
LED pedestrian signals
Fuse and transient suppressor incorporated for
superior line and load protection
90% reduction in power vs. incandescent
Long life; Up to 10 times longer than incandescent
Sealed moisture resistant enclosure
Lens has a textured surface to reduce glare
Easy to install into existing signal enclosure
FEATURES / BENEFITS
UNIFORM APPEARANCE
HAND and PERSON
PEDESTRIAN SIGNALS
SPECIFICATIONS
Operating Voltage Range:
80VAC to 135VAC (120VAC nominal)
Operating Temperature Range: -40°C to +74°C
Turn-on / Turn-off Time < 75 msec
Power Factor > 0.9
Total Harmonic Distortion < 20%
Meets FCC Title 47, Subpart B, Section 15
regulations for electrical noise
Failed State Impedance > 250K ohm within 300ms
Conforms to MIL-STD-810F for blowing rain
Conforms to MIL-STD-883, Test Method 2007,
for mechanical vibration
Conforms to MIL-STD-883, Test Method 1010,
temperature cycling requirements
Provided with quick connect terminals and spade adapters
Written manufacturer’s warranty available on request
All products traceable by serial number
Luminance uniformity and color uniformity exceed
ITE PTCSI-2 LED Pedestrian Signal Specification
requirements
Symbol Colors:
Upraised Hand - Portland Orange
Walking Person - Lunar White
Transient suppression exceeds ITE PTCSI-2 LED
Pedestrian Signal Specification requirements and
meets the following standards:
NEMA TS-2 Sec. 2.1.6 and Sec. 2.1.8
IEC 1000-4-5, 3KV, 2 ohm source impedance
ANSI/IEEE C62, 41-2002; IEC 61000-4-12,
6KV, 200A, 100KHz ring wave
Power supply is conformally coated for robust operation
MDTSHWPEXCAL001_A
Dialight reserves the right to make changes at any time
in order to supply the best product possible.