
2SC5501A
No. A1061-5/5
S Parameters (Common emitter)
VCE=5V, IC=7mA, ZO=50Ω
Freq(MHz)
S11
∠S11
S21
∠S21
S12
∠S12
S22
∠S22
100
0.844
--39.2
14.003
150.3
0.028
65.9
0.886
--22.4
200
0.748
--74.3
12.502
129.9
0.044
50.9
0.712
--35.2
400
0.637
--120.9
8.689
105.1
0.059
41.2
0.515
--45.0
600
0.586
--146.5
6.395
90.2
0.066
40.3
0.423
--48.3
800
0.569
--161.6
4.930
80.2
0.073
41.5
0.387
--50.9
1000
0.556
--172.8
3.990
71.7
0.082
42.2
0.373
--53.7
1200
0.551
178.3
3.338
64.2
0.090
44.5
0.367
--57.2
1400
0.543
170.4
2.882
57.2
0.100
45.9
0.363
--61.2
1600
0.539
163.2
2.554
51.2
0.111
46.8
0.374
--64.7
1800
0.537
156.7
2.275
44.9
0.122
46.8
0.384
--68.6
2000
0.532
150.5
2.055
38.6
0.134
46.1
0.390
--72.6
VCE=5V, IC=20mA, ZO=50Ω
Freq(MHz)
S11
∠S11
S21
∠S21
S12
∠S12
S22
∠S22
100
0.668
--72.1
29.572
134.7
0.022
56.8
0.729
--36.1
200
0.572
--116.7
20.212
112.4
0.031
49.1
0.496
--48.2
400
0.527
--151.7
11.297
93.7
0.042
52.5
0.325
--52.4
600
0.514
--167.7
7.718
83.3
0.054
55.4
0.273
--53.6
800
0.511
--177.8
5.834
75.9
0.066
57.4
0.258
--55.7
1000
0.506
174.1
4.677
68.7
0.080
58.1
0.250
--58.7
1200
0.504
167.1
3.940
62.5
0.093
57.3
0.253
--62.5
1400
0.501
161.0
3.357
56.2
0.107
56.5
0.258
--66.5
1600
0.497
155.2
2.957
51.1
0.122
55.5
0.269
--70.6
1800
0.497
149.4
2.652
45.3
0.136
54.0
0.276
--74.5
2000
0.495
144.1
2.384
39.7
0.151
51.6
0.288
--78.5
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party’s
intellectual property rights which has resulted from the use of the technical information and products mentioned
above.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
This catalog provides information as of June, 2008. Specifications and information herein are subject
to change without notice.
PS