參數資料
型號: 20-101-0709
廠商: Rabbit Semiconductor
文件頁數: 49/90頁
文件大?。?/td> 0K
描述: INTERFACE GRAPHIC DISPLAY OP6700
標準包裝: 1
系列: SBC
模塊/板類型: 單板計算機模塊
適用于相關產品: OP6700
其它名稱: 20-101-709
20-101-709-ND
User’s Manual
49
5.3 How to Set IP Addresses in the Sample Programs
With the introduction of Dynamic C 7.30 we have taken steps to make it easier to run
many of our sample programs. You will see a TCPCONFIG macro. This macro tells
Dynamic C to select your configuration from a list of default configurations. You will
have three choices when you encounter a sample program with the TCPCONFIG macro.
1. You can replace the TCPCONFIG macro with individual MY_IP_ADDRESS,
MY_NETMASK
, MY_GATEWAY, and MY_NAMESERVER macros in each program.
2. You can leave TCPCONFIG at the usual default of 1, which will set the IP configurations
to 10.10.6.100, the netmask to 255.255.255.0, and the nameserver and gateway
to 10.10.6.1. If you would like to change the default values, for example, to use an IP
address of 10.1.1.2 for the Intellicom board, and 10.1.1.1 for your PC, you can edit
the values in the section that directly follows the “General Configuration” comment in
the TCP_CONFIG.LIB library. You will find this library in the LIB\TCPIP directory.
3. You can create a CUSTOM_CONFIG.LIB library and use a TCPCONFIG value greater
than 100. Instructions for doing this are at the beginning of the TCP_CONFIG.LIB
library in the LIB\TCPIP directory.
There are some other “standard” configurations for TCPCONFIG that let you select differ-
ent features such as DHCP. Their values are documented at the top of the
TCP_CONFIG.LIB
library in the LIB\TCPIP directory. More information is available in
the Dynamic C TCP/IP User’s Manual.
IP Addresses Before Dynamic C 7.30
Most of the sample programs use macros to define the IP address assigned to the board and
the IP address of the gateway, if there is a gateway. Instead of the TCPCONFIG macro, you
will see a MY_IP_ADDRESS macro and other macros.
#define MY_IP_ADDRESS "10.10.6.170"
#define MY_NETMASK "255.255.255.0"
#define MY_GATEWAY "10.10.6.1"
#define MY_NAMESERVER "10.10.6.1"
In order to do a direct connection, the following IP addresses can be used for the Intellicom:
#define MY_IP_ADDRESS "10.1.1.2"
#define MY_NETMASK "255.255.255.0"
// #define MY_GATEWAY "10.10.6.1"
// #define MY_NAMESERVER "10.10.6.1"
In this case, the gateway and nameserver are not used, and are commented out. The IP
address of the board is defined to be 10.1.1.2. The IP address of you PC can be defined
as 10.1.1.1.
相關PDF資料
PDF描述
AT45DB081B-RI IC FLASH 8MBIT 20MHZ 28SOIC
AT45DB081B-RC IC FLASH 8MBIT 20MHZ 28SOIC
AT45DB081B-CI IC FLASH 8MBIT 20MHZ 14CBGA
AT45DB081B-CC IC FLASH 8MBIT 20MHZ 14CBGA
AT45DB041B-TC IC FLASH 4MBIT 20MHZ 28TSOP
相關代理商/技術參數
參數描述
20-101-0727 功能描述:模塊化系統 - SOM BL2010 W/ 512K FLASH RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-0732 功能描述:單板計算機 OP7100 W/512K SRAM RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm
20-101-0737 制造商:Digi International 功能描述:SMARTBLOCK OEM W/RTC - MOQ: 50 - Bulk 制造商:Digi International Inc 功能描述:SMARTBLOCK OEM W/RTC MOQ: 50 制造商:Rabbit Semiconductor 功能描述:Smartblock OEM w/RTC
20-101-0738 功能描述:單板計算機 SR9150 Eth 512K SRAM RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm
20-101-0739 制造商:Digi International 功能描述:BL1700 16IN/16OUT 512K SRAM 256K FLASH - MOQ: 25 - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:ETH CTLR BL1700 16I/O 256K FLASH 制造商:Rabbit Semiconductor 功能描述:BL1700 512K SRAM 16 In/Out 256K Flash