The program SSI.C
參數資料
型號: 20-101-0554
廠商: Rabbit Semiconductor
文件頁數: 59/94頁
文件大?。?/td> 0K
描述: COMPUTER SNGL BD BL2000 BOTT MNT
標準包裝: 1
系列: SBC
模塊/板類型: 單板計算機模塊
適用于相關產品: BL2000
58
Wildcat (BL2000)
5.4 Running More Sample Programs With a Direct Connection
The program SSI.C (SAMPLES\BL2000\TCPIP\) demonstrates how to make the
BL2000 a Web server. This program allows you to turn the LEDs on an attached Demon-
stration Board from the Tool Kit on and off from a remote Web browser. LEDs DS4–DS8
on the BL2000 will match those on the Web page. As long as you have not modified the
TCPCONFIG 1
macro in the sample program, enter the following server address in your
Web browser to bring up the Web page served by the sample program.
http://10.10.6.100
Otherwise use the TCP/IP settings you entered in the TCP_CONFIG.LIB library.
The sample program SMTP.C (SAMPLES\BL2000\TCPIP\) allows you to send an E-mail
when a switch on the Demonstration Board is pressed. Follow the instructions included
with the sample program.
The sample program TELNET.C (SAMPLES\BL2000\TCPIP\) allows you to communi-
cate with the BL2000 using the Telnet protocol. This program takes anything that comes
in on a port and sends it out Serial Port B. It uses digital input IN0 to indicate that the
TCP/IP connection should be closed, and it uses high-current output OUT0 to indicate that
there is an open connection. You may change the digital input and output to suit your
application needs.
Run the Telnet program on your PC (Start > Run telnet 10.10.6.100). As long as
you have not modified the TCPCONFIG 1 macro in the sample program, the IP address is
10.10.6.100 as shown; otherwise use the TCP/IP settings you entered in the
TCP_CONFIG.LIB
library. Each character you type will be printed in Dynamic C's STDIO
window, indicating that the board is receiving the characters typed via TCP/IP.
5.5 Where Do I Go From Here?
NOTE: If you purchased your BL2000 through a distributor or Rabbit partner, contact
the distributor or partner first for technical support.
If there are any problems at this point:
Use the Dynamic C Help menu to get further assistance with Dynamic C.
Check the Rabbit Technical Bulletin Board and forums at www.rabbit.com/support/bb/
Use the Technical Support e-mail form at www.rabbit.com/support/.
If the sample programs ran fine, you are now ready to go on.
Additional sample programs are described in the Dynamic C TCP/IP User’s Manual.
Refer to the Dynamic C TCP/IP User’s Manual to develop your own applications. An
Introduction to TCP/IP provides background information on TCP/IP, and is available on
相關PDF資料
PDF描述
006200508130000+ CONN FFC/FPC 8POS 1MM R/A SMD
32FMN-BMTR-A-TB CONN FMN HSNG 32POS SGL REV SMD
32FMN-BMT-A-TF CONN FMN HSNG 32POS SNGL NOR SMD
006200512230000 CONN FFC/FPC 12POS 1MM R/A SMD
101-1051 MODULE MEMORY CORE RCM3365
相關代理商/技術參數
參數描述
20-101-0555 功能描述:單板計算機 BL2000 Friction Lock RoHS:否 制造商:Ampro By ADLINK 外觀尺寸:EPIC 處理器類型:Intel Atom D510 頻率:1.66 GHz 存儲容量:2 GB (max) 存儲類型:DDR2, L2 Cache 接口類型:Ethernet, PS/2, SATA, Serial, USB 工作電源電壓:5 V, 12 V 功耗:13 W 最大工作溫度:+ 70 C 尺寸:165.1 mm x 114.3 mm
20-101-0556 功能描述:模塊化系統 - SOM BL2000 W/IDCHEADERS RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-0561 功能描述:模塊化系統 - SOM RCM3400 Rabbit Core RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-0562 功能描述:模塊化系統 - SOM RCM3410 RABBITCORE RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
20-101-0563 功能描述:模塊配件 RCM3400 PROTOTYPING BOARD RoHS:否 制造商:Lantronix 產品: 用于: